diff options
Diffstat (limited to 'src/fripost-partman-udeb')
-rw-r--r-- | src/fripost-partman-udeb/Makefile | 13 | ||||
-rw-r--r-- | src/fripost-partman-udeb/base.sh | 527 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/changelog | 5 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/compat | 1 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/control | 21 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/copyright | 7 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/install | 1 | ||||
-rwxr-xr-x | src/fripost-partman-udeb/debian/postinst | 25 | ||||
-rwxr-xr-x | src/fripost-partman-udeb/debian/rules | 3 | ||||
-rw-r--r-- | src/fripost-partman-udeb/debian/templates | 84 | ||||
-rw-r--r-- | src/fripost-partman-udeb/lib/stdbuf.c | 11 |
11 files changed, 698 insertions, 0 deletions
diff --git a/src/fripost-partman-udeb/Makefile b/src/fripost-partman-udeb/Makefile new file mode 100644 index 0000000..b603c83 --- /dev/null +++ b/src/fripost-partman-udeb/Makefile @@ -0,0 +1,13 @@ +CC ?= gcc +CFLAGS ?= -Wall -x c -s + +LIBS = lib/stdbuf.so + +all: ${LIBS} + +%.so: %.c + #TODO: multiarch (-m32/-m64) + ${CC} ${CFLAGS} $< -fPIC -shared -o $@ + +clean: + rm -f ${LIBS} diff --git a/src/fripost-partman-udeb/base.sh b/src/fripost-partman-udeb/base.sh new file mode 100644 index 0000000..114e678 --- /dev/null +++ b/src/fripost-partman-udeb/base.sh @@ -0,0 +1,527 @@ +# Functions commonly used by fripost-partman shell scripts +# +# Copyright 2013 Guilhem Moulin <guilhem@fripost.org> +# +# Licensed under the GNU GPL version 3 or higher. + +true ${DEBIAN_HAS_FRONTEND:=} ${DEBCONF_REDIR:=} +. /usr/share/debconf/confmodule + +# TODO: +# * support sofware RAID (mdadm) +# * encryption without SSH daemon (eg when /home is on a separate device) +# * encryption of multiple disks with the same key (eg / on a software raid) + + +# Log a message. +log() { + logger -t fripost -- "$@" +} + +# Log a fatal error and quit. +fatal() { + logger -t fripost -p user.err -- "$@" + exit 1 +} + +# Ensure stdout is opened with line buffering. If some day stdbuf(1) is +# available in busybox, we should replace the LD_PRELOAD by 'stdbuf -oL -eL'. +stdbuf() { + LD_PRELOAD=/lib/fripost-partman/stdbuf.so "$@" +} + +# Wait for a device to be created +wait_for_device() { + local device="$1" timeout=40 + + until [ -b "$device" -o $timeout -le 0 ]; do + log "Waiting for ${device}..." + sleep 0.25 + timeout=$(( $timeout - 1 )) + done + [ -b "$device" ] || fatal "Error: $device not found!" +} + + +############################################################################## +# Wipe the disk (unless d-i's 'fripost/wipe-device' is 'none') +# +# Usage: fripost_wipe <device> + +fripost_wipe() { + local device="$1" source bs=8192 blockdir size wipe fifo pid + blockdir="/sys/block/${device#/dev/}" + + db_get fripost/wipe-device + if [ "$RET" = none ]; then + log "Not wiping $device" + return 0 + fi + + source="/dev/$RET" + log "Want to wipe $device using source $source" + [ -b "$device" -a -d "$blockdir" -a -c "$source" ] || \ + fatal "Invalid device $device or source $source" + + size=$(( `cat $blockdir/size` * `cat $blockdir/queue/physical_block_size` )) + + wipe="dd if=$source of=$device bs=$bs" + db_subst fripost/wipe-device_progress_title DISK "$device" + db_subst fripost/wipe-device_progress_title SIZE "$size" + if [ "$source" = /dev/zero ]; then + db_subst fripost/wipe-device_progress_title WHAT "zeroes" + elif [ "$source" = /dev/random -o "$source" = /dev/urandom ]; then + db_subst fripost/wipe-device_progress_title WHAT "bytes of random data" + else + db_subst fripost/wipe-device_progress_title WHAT "bytes" + fi + db_progress START 0 $(( $size / $bs )) fripost/wipe-device_progress_title + db_subst fripost/wipe-device_progress_info COMMAND "$wipe" + db_progress INFO fripost/wipe-device_progress_info + + fifo=$(mktemp -u) + /bin/mknod "$fifo" p || exit 1 + trap 'echo kill $pid' EXIT + $wipe 2> "$fifo" & pid=$! + heartbeat $pid USR1 & + + local n records dir + while read -u 7 n records dir; do + [ "$records" = records -a "$dir" = out ] && db_progress SET ${n%+*} + done 7< "$fifo" + db_progress SET $(( $size / $bs )); sleep 0.25 + + rm -f "$fifo" + trap '' EXIT + + db_progress STOP + db_unregister fripost/wipe-device_progress_title + db_unregister fripost/wipe-device_progress_info +} + +heartbeat () { + local pid=$1 sig=${2:-SIGHUP} sleep=${3:-1} + until false; do + sleep $sleep + /bin/kill -$sig $pid 2>/dev/null || break + done +} + + + +############################################################################## +# Partitioning +# +# Usage: fripost_mkpart <device> <name> <size in bytes or %> [flag | +flag | -flag | ...] +# +# Prints the bloc device for the new partition. <size> can be given +# using SI prefixes T,G,M, or k. If <size> is a percentage, it is +# relative to the free capacity. + +fripost_mkpart() { + local device="$1" name="$2" size="$3" grain=$(( 256*32 )) offset bs + local start stop part flag free + # TODO: names are supported on GPT only. What is the second argument + # of mkpart on msdos? + + bs=$(cat /sys/block/${device#/dev/}/queue/physical_block_size) + + if /sbin/parted -sm "$device" p | grep -q '^[1-9][0-9]*:'; then + # The last offset, in sector; it is *always* supposed to be aligned. + start=$( /sbin/parted -sm "$device" u s p \ + | grep '^[1-9][0-9]*:' \ + | sort -t: -nk2,2 \ + | tail -1 \ + | sed -r 's/^[1-9][0-9]*:[^:]*:([1-9][0-9]*)s:.*/\1/' ) + start=$(( 1 + $start )) + else + # There are no partitions yet + offset=$(cat /sys/block/${device#/dev/}/alignment_offset) + if [ $offset -eq 0 ]; then + # 64 is arbitrary here; $grain may be better since aligned, + # but the 1st partition is typically /boot or something + # without heavy IO, so choosing a smaller value means we get + # more space without significant performance penalty + start=64 + else + start=$(( $offset / $bs )) + fi + fi + + # Remove the SI prefix, or compute the size relative to a percentage + case "$size" in + *T) size=$(( ${size%T} * 1024**4 ));; + *G) size=$(( ${size%G} * 1024**3 ));; + *M) size=$(( ${size%M} * 1024**2 ));; + *K) size=$(( ${size%K} * 1024 ));; + *%) free=$(( `cat /sys/block/${device#/dev/}/size` - 1 - $start )) + size=$(( $bs * $free * ${size%\%} / 100 )) + ;; + *) fatal "Unknown size $size" ;; + esac + + # Round toward 0 to preserve the alignement + stop=$(( $start + $size / $bs )) + stop=$(( $stop - $stop % $grain - 1 )) + log "Creating partition '$name' on $device, between sectors $start and $stop" + [ $start -ge $stop ] && fatal "Cannot create partition: $start >= $stop" + /sbin/parted -a minimal -s $device mkpart "$name" ${start}s ${stop}s + + # The partition index that is to be created + part=$( /sbin/parted -sm $device u s p \ + | grep -m1 "^[0-9]:${start}s:" \ + | sed 's/:.*//' ) + + while [ $# -gt 3 ]; do + flag="$4" + log "Partition flag for ${device}${part} ($name): $flag" + case "$flag" in + +*) /sbin/parted -s $device set $part "${flag#+}" on ;; + -*) /sbin/parted -s $device set $part "${flag#-}" off ;; + *) /sbin/parted -s $device toggle $part "$flag" ;; + esac + shift + done + + wait_for_device "${device}${part}" + echo ${device}${part} +} + + + +############################################################################## +# Encryption +# +# Usage: fripost_encrypt <device> <name> [<cryptsetup options>] + +fripost_encrypt() { + local device="$1" name="$2" keyfile sshHostKey import=/cdrom/include + local fifo pid + shift; shift + keyfile=$(mktemp) || exit 1 + + log "Encryting device $device and sets up a mapping $name" + + db_input high fripost/encryption-password || true + db_go + db_get fripost/encryption-password + + if [ -n "$RET" ]; then + log "The password can be found from debconf (hey, that's insecure!)" + # Since we're using the builtin, the password shouldn't be + # visible in ps(1). + echo -n "$RET" > "$keyfile" + db_set fripost/encryption-password '' + + else + log "Starting a SSH daemon to slurp the volume key..." + local type=rsa + db_subst fripost/ssh-keypair-generation_progress_title TYPE $type + db_progress START 0 1 fripost/ssh-keypair-generation_progress_title + + mkdir -pm0755 /etc/ssh/ + sshHostKey=/etc/ssh/ssh_host_rsa_key + /usr/bin/ssh-keygen -b 4096 -t $type -N '' -C $sshHostKey -f $sshHostKey + db_progress SET 1; sleep 0.25 + db_progress STOP + db_unregister fripost/ssh-keypair-generation_progress_title + + cat > /etc/ssh/sshd_config <<- EOF + Port 22 + Protocol 2 + HostKey $sshHostKey + UsePrivilegeSeparation no + + PasswordAuthentication no + ChallengeResponseAuthentication no + HostbasedAuthentication no + PubkeyAuthentication yes + + PermitRootLogin yes + AllowUsers root + StrictModes yes + + AllowAgentForwarding no + AllowTcpForwarding no + ForceCommand /bin/cat >$keyfile + EOF + + # Populate the authorized keys. + [ -d ~root/.ssh ] || mkdir -m0700 ~root/.ssh + copy_authorized_keys $import/authorized_keys ~root/.ssh/authorized_keys 'no-pty' + + # Start the SSH daemon + touch /var/log/lastlog + /usr/sbin/sshd + + # Tell the user we're ready + db_subst fripost/encryption-slurpkey_text IPv4 "$(getIPv4)" + db_subst fripost/encryption-slurpkey_text SSHFPR_SERVER \ + "$(/usr/bin/ssh-keygen -lf $sshHostKey)" + db_subst fripost/encryption-slurpkey_text SSHFPR_AUTHORIZED \ + "$(sshfprs ~root/.ssh/authorized_keys ' - ')" + + # Anything sent to the SSH is stored into $keyfile, which is our LUKS key. + until test -s "$keyfile"; do + db_settitle fripost/encryption-slurpkey_title + db_input critical fripost/encryption-slurpkey_text + db_go + done + + # Kill the daemon, we're done + log "Killing the SSH daemon..." + kill `cat /var/run/sshd.pid` || true + fi + + # Load dm-crypt + /sbin/dmsetup targets | cut -d' ' -f1 | grep -q '^crypt$' \ + || /sbin/modprobe -v dm_crypt + + log "cryptsetup options: $@" + db_progress START 0 100 fripost/cryptsetup-genkey_progress_title + db_progress INFO fripost/cryptsetup-genkey_progress_info + + fifo=$(mktemp -u) + /bin/mknod "$fifo" p || exit 1 + trap 'echo kill $pid' EXIT + stdbuf /sbin/cryptsetup -q "$@" --key-file="$keyfile" luksFormat "$device" \ + | stdbuf sed -nr 's/^Generating key \(([0-9]+)% done\)\.$/\1/p' > "$fifo" & pid=$! + + local n + while read -u 7 n; do + db_progress SET $n + done 7< "$fifo" + db_progress SET 100; sleep 0.25 + + rm -f "$fifo" + trap '' EXIT + + db_progress STOP + db_unregister fripost/cryptsetup-genkey_progress_title + db_unregister fripost/cryptsetup-genkey_progress_info + + # Open the LUKS device and set up the mapping + /sbin/cryptsetup --key-file="$keyfile" luksOpen "$device" "$name" + + log "Removing the key file" + rm -f "$keyfile" # We are on a ramdisk, so it's good enough to unlink(2) + + # Add an entry to the crypttab + printf "%-15s %-41s %-15s %s\n" \ + "$name" UUID=$(/bin/block-attr --uuid "$device") none luks \ + >> /tmp/crypttab + + local m _ + [ -d /var/lib/fripost ] || mkdir /var/lib/fripost + # The modules required to fire up dropbear and start cryptsetup in the ramdisk. + echo dm_crypt > /tmp/initramfs-modules + while read m _; do /sbin/modinfo -F filename "$m"; done < /proc/modules \ + | sed -nr "s@^/lib/modules/`uname -r`/kernel/((arch/[^/]+/)?crypto|drivers/(ata|scsi))(/.*)?/([^/]+)\.ko\$@\5@p" \ + >> /var/lib/fripost/initrd-modules + /bin/apt-install busybox cryptsetup || true + + wait_for_device "/dev/mapper/$name" +} + + +# Like ssh-keygen -lf, but for a file such as authorized_keys, which +# may contain multiple keys. +# +# Usage: sshfprs.sh file [prefix] + +sshfprs() { + local file="$1" prefix="${2:-}" pk + + while read pk; do + # /usr/bin/ssh-keygen can't read from STDIN, and the '<<<' is + # not POSIX, so we save each pubkey in a temporary file + pkf=$(mktemp) + echo "$pk" > "$pkf" + echo "${prefix}$(/usr/bin/ssh-keygen -lf $pkf)" + rm -f "$pkf" + done < "$file" +} + +# Copy an authorized_keys file, possibly adding some options. The input +# format is sshd(8)'s; see the section called "AUTHORIZED_KEYS FILE +# FORMAT" in the manpage. The character '#' cannot occur in the options. + +copy_authorized_keys() { + local from="$1" to="$2" + if [ $# -gt 2 ]; then + sed -r "s#^([^#]+\s)?(ssh-(dss|rsa)|ecdsa-sha2-nistp(256|384|521))\s#$3 \2 #" \ + "$from" > "$to" + else + cp "$from" "$to" + fi + chmod 0600 "$to" +} + + + +############################################################################## +# Add a progress bar to mkfs(8). +# +# Usage: fripost_mkfs <type> <device> [<options>] + +fripost_mkfs() { + local type="$1" device="$2" fifo pid line stage step total= + shift; shift + + log "Formatting $device as $type; options $@" + db_subst fripost/mkfs_progress_title DEVICE "$device" + db_subst fripost/mkfs_progress_title TYPE "$type" + wait_for_device "$device" + + fifo=$(mktemp -u) + /bin/mknod "$fifo" p || exit 1 + trap 'echo kill $pid' EXIT + /sbin/mkfs."$type" "$@" "$device" | tr '\b' '\n' > "$fifo" & pid=$! + + while read -u 7 line; do + # XXX: The parsing has been tested with mkfs.ext{2,3,4} only. + case "$line" in + *:*/*) + [ -z "$total" ] || db_progress STOP + + stage="${line%: *}" + step="${line##*: }" + log "mkfs(8) stage '$stage', $step steps" + + total="${step#*/}" + db_progress START 0 $total fripost/mkfs_progress_title + db_progress SET ${step%/*} + + db_subst fripost/mkfs_progress_info STAGE "$stage" + db_progress INFO fripost/mkfs_progress_info + ;; + */$total) + [ -z "$total" ] || db_progress SET ${line%/*} + ;; + done) + [ -z "$total" ] || db_progress SET $total + ;; + esac + done 7< "$fifo" + + rm -f "$fifo" + trap '' EXIT + + [ -z "$total" ] || db_progress STOP + db_unregister fripost/mkfs_progress_title + db_unregister fripost/mkfs_progress_info +} + + +############################################################################## +# Set up the fstab +# +# Usage: fripost_fstab <device> <mountpoint> <type> [<options>] +# +# Note: Don't forget to run 'fripost_mount_partitions' after the last +# call to 'fripost_fstab'. + +fripost_fstab() { + local device="$1" mp="$2" type="$3" options="${4:-defaults}" pass + + # TODO: EFI should be set with pass 1 + if [ "$mp" = / ]; then + log "Got root device, $device" + pass=1 + elif [ "$type" = swap ]; then + log "Got swap device, $device" + pass=0 + else + log "Got other device, $device -> $mp" + pass=2 + fi + + # Add an entry to the fstab + fripost_fstab_addentry $device $mp $type $options 0 $pass +} + +fripost_fstab_addentry() { + local device=$1 mp=$2 type=$3 options=$4 dump=$5 pass=$6 + local fstab=/tmp/fstab + local entry="%-41s %-15s %-7s %-31s %-7s %s\n" + log "Adding fstab entry $device -> $mp" + + if ! [ -s $fstab -a -f $fstab ]; then + # No fstab has bee created yet. We copy the header from + # /lib/partman/finish.d/39create_fstab_header + cat > $fstab <<-EOF + # /etc/fstab: static file system information. + # + # Use 'blkid' to print the universally unique identifier for a device; + # this may be used with UUID= as a more robust way to name devices that + # works even if disks are added and removed. See fstab(5). + # + EOF + printf "$entry" '# <file system>' '<mount point>' '<type>' \ + '<options>' '<dump>' '<pass>' \ + >> $fstab + fi + + # Always use UUIDs + local uuid=$(/bin/block-attr --uuid "$device") + if [ -z "$uuid" ]; then + log "Warning: Block device $device has no UUID!" + printf "$entry" "$device" $mp $type $options $dump $pass >> $fstab + else + log "Block device $device has UUID $uuid" + printf "$entry" "UUID=$uuid" $mp $type $options $dump $pass >> $fstab + + # Fix udev's UUID mapping + if ! [ -h /dev/disk/by-uuid/"$uuid" ]; then + device=$(/bin/mapdevfs "$device") + log "Adding a symlink UUID $uuid -> $device" + ln -s ../../"${device#/dev/}" /dev/disk/by-uuid/"$uuid" + fi + fi +} + + + +############################################################################## +# Mount all entries in the fstab +# +# Usage: fripost_mount_partitions + +fripost_mount_partitions() { + local cdrom uuid mp type options _ + + # sort(1), to ensure that roots are mounted earlier, regardless of + # where they appear in the file (eg, /boot can appear before /). + sed -e 's/#.*//' -e '/^\s*$/d' -e 's/\s\s*/ /g' /tmp/fstab \ + | grep -v '\s0$' \ + | sort -t' ' -k2,2 \ + | while read uuid mp type options _; do + local dev=$(/sbin/blkid -U "${uuid#UUID=}") + log "Found fstab entry: $dev -> $mp" + wait_for_device "$dev" + if [ "$type" = swap ]; then + /sbin/swapon "$dev" + elif [ / = $(expr substr "$mp" 1 1) ]; then + mkdir "/target$mp" + /bin/mount -t "$type" -o "$options" "$dev" "/target$mp" + fi + done + + # Post-installation scripts may use the install CD as a local mirror + # for APT packages. TODO: What if it was a USB stick? A netboot? + cdrom=$( sed -rn 's#^(\S+) /cdrom.*#\1#p' /proc/mounts \ + | grep -m1 -Ev '^/dev/(loop|sd[a-z])' ) + [ -n "$cdrom" ] || fatal "Error: Is /cdrom a mountpoint?" + fripost_fstab_addentry "$cdrom" /media/cdrom0 udf,iso9660 user,noauto 0 0 + mkdir -p /target/media/cdrom0 + ln -s cdrom0 /target/media/cdrom + + # Move the fstab and crypttab where they belong + [ -d /target/etc ] || mkdir /target/etc + mv /tmp/fstab /target/etc/fstab + [ \! -f /tmp/crypttab ] || mv /tmp/crypttab /target/etc/crypttab +} + +getIPv4() { + /bin/ip addr show "${1:-eth0}" | sed -nr 's/^\s+inet\s([0-9.]{4,32}).*/\1/p' +} diff --git a/src/fripost-partman-udeb/debian/changelog b/src/fripost-partman-udeb/debian/changelog new file mode 100644 index 0000000..6146216 --- /dev/null +++ b/src/fripost-partman-udeb/debian/changelog @@ -0,0 +1,5 @@ +fripost-partman (0.0.0) unstable; urgency=low + + * Tests + + -- Guilhem Moulin <guilhem@fripost.org> Wed, 09 Oct 2013 17:33:16 +0200 diff --git a/src/fripost-partman-udeb/debian/compat b/src/fripost-partman-udeb/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/src/fripost-partman-udeb/debian/compat @@ -0,0 +1 @@ +7 diff --git a/src/fripost-partman-udeb/debian/control b/src/fripost-partman-udeb/debian/control new file mode 100644 index 0000000..043fa49 --- /dev/null +++ b/src/fripost-partman-udeb/debian/control @@ -0,0 +1,21 @@ +Source: fripost-partman +Section: debian-installer +Priority: optional +Maintainer: Guilhem Moulin <guilhem@fripost.org> +Build-Depends: debhelper (>= 7) + +Package: fripost-partman +XC-Package-Type: udeb +Architecture: all +Depends: cdebconf-udeb, parted-udeb, xfsprogs-udeb, hw-detect, md-modules, + mdadm-udeb, lvm2-udeb, dmsetup-udeb, ntfstools-udeb, xfs-modules, + ext2-modules, ext3-modules, openssh-server-udeb, cryptsetup-udeb, + crypto-dm-modules, ${misc:Depends} +Provides: created-fstab, made-filesystems, mounted-partitions, + partitioned-harddrives +Description: Partition Hard Drives using shell scripts. + . + Warning: This module *will* wipe your disk if you ask it to do so, without + giving you the chance to back out. Do not use this on systems you care about + unless you've made thorough tests with Virtual Machines. +XB-Installer-Menu-Item: 4199 diff --git a/src/fripost-partman-udeb/debian/copyright b/src/fripost-partman-udeb/debian/copyright new file mode 100644 index 0000000..4e26ce2 --- /dev/null +++ b/src/fripost-partman-udeb/debian/copyright @@ -0,0 +1,7 @@ +Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Source: native package + +Files: * +Copyright: © 2013 Guilhem Moulin <guilhem@fripost.org> +License: GPL-3+ + diff --git a/src/fripost-partman-udeb/debian/install b/src/fripost-partman-udeb/debian/install new file mode 100644 index 0000000..885868e --- /dev/null +++ b/src/fripost-partman-udeb/debian/install @@ -0,0 +1 @@ +base.sh lib/*.so lib/fripost-partman diff --git a/src/fripost-partman-udeb/debian/postinst b/src/fripost-partman-udeb/debian/postinst new file mode 100755 index 0000000..6ba238e --- /dev/null +++ b/src/fripost-partman-udeb/debian/postinst @@ -0,0 +1,25 @@ +#! /bin/sh + +set -ue + +. /lib/fripost-partman/base.sh + +log "Starting..." +db_input high fripost/partition-script || true +db_go +db_get fripost/partition-script +script=/"${RET#/}" + +[ -f "$script" -a -x "$script" ] || \ + fatal "$script does not exist, or is not executable." + +log "Running $script" +log-output -t fripost-partman "$script" + +rv=$? +if [ $rv -ne 0 ]; then + log "Partitioning script failed; exited with $rv" + exit $rv +fi + +log "Partitioning appears to have completed successfully." diff --git a/src/fripost-partman-udeb/debian/rules b/src/fripost-partman-udeb/debian/rules new file mode 100755 index 0000000..cbe925d --- /dev/null +++ b/src/fripost-partman-udeb/debian/rules @@ -0,0 +1,3 @@ +#!/usr/bin/make -f +%: + dh $@ diff --git a/src/fripost-partman-udeb/debian/templates b/src/fripost-partman-udeb/debian/templates new file mode 100644 index 0000000..00377a5 --- /dev/null +++ b/src/fripost-partman-udeb/debian/templates @@ -0,0 +1,84 @@ +Template: debian-installer/fripost-partman/title +Type: text +Description: Partition disks using a shell script + +Template: fripost/partition-script +Type: text +Description: Which script should be used for partitioning? +Extended_description: The path should be absolute, and the script must + be executable. + +Template: fripost/wipe-device +Type: select +Default: zero +Choices: none, zero, urandom, random +Description: Which kind of data fill the disk with before encryption? +Extended_description: 'none' means disks will NOT wiped, otherwise use + /dev/{zero,urandom,random} as the source data to fill disks with. + Beware that the later two may drain the entropy pool of the system! + +Template: fripost/wipe-device_progress_title +Type: text +Description: Filling ${DISK} with ${SIZE} ${WHAT} + +Template: fripost/wipe-device_progress_info +Type: text +Description: ${COMMAND} + +Template: fripost/encrypt +Type: boolean +Default: true +Description: Should the system disk be fully encrypted? (Excluding /boot.) + +Template: fripost/encryption-password +Type: password +Default: +Description: Password for full-disk encryption? +Extended_description: If left empty, a SSH daemon will be fired and the + automatic install will be interupted, waiting for the user to dump the + password on the standard input. + +Template: fripost/ssh-keypair-generation_progress_title +Type: text +Description: Generating public/private ${TYPE} key pair + +Template: fripost/encryption-slurpkey_title +Type: note +Description: Waiting for passphrase + +Template: fripost/encryption-slurpkey_text +Type: text +Description: Press 'continue' once you have sent the key + You now need to send the encryption key for the LUKS/dm-crypt volume to + this special-purpose SSH server: + . + ssh -o UserKnownHostsFile=/dev/null -T root@${IPv4} < /path/to/key + . + To defeat MiTM-attacks, please ensure that the server fingerprint matches + . + ${SSHFPR_SERVER} + . + Key(s) that are granted access have the following fingerprint: + . + ${SSHFPR_AUTHORIZED} + . + Note: This server is ephemeral, and will be replaced with a full-blown + daemon toward the end of the installation. Using /dev/null as the + Known Hosts File is meant to tell the SSH client not to remember its + public key. + +Template: fripost/cryptsetup-genkey_progress_title +Type: text +Description: Generating volume key + +Template: fripost/cryptsetup-genkey_progress_info +Type: text +Description: This will take a while if it drains the entropy pool + +Template: fripost/mkfs_progress_title +Type: text +Description: Formatting ${DEVICE} as ${TYPE} + +Template: fripost/mkfs_progress_info +Type: text +Description: ${STAGE} diff --git a/src/fripost-partman-udeb/lib/stdbuf.c b/src/fripost-partman-udeb/lib/stdbuf.c new file mode 100644 index 0000000..13e6c06 --- /dev/null +++ b/src/fripost-partman-udeb/lib/stdbuf.c @@ -0,0 +1,11 @@ +/* All credits to https://lists.gnu.org/archive/html/bug-coreutils/2008-11/msg00138.html + * Cf. also http://www.pixelbeat.org/programming/stdio_buffering/ + * http://git.savannah.gnu.org/gitweb/?p=coreutils.git;a=blob;f=src/stdbuf.c;h=2500c300147f30aa5d2d99fd29b5865637a11290;hb=HEAD + */ + +#include <stdio.h> + +__attribute__ ((constructor)) void +cah9mion4ocim6ip () { + setvbuf (stdout, NULL, _IOLBF, 0); +} |