summaryrefslogtreecommitdiffstats
path: root/roles/IMAP/files/etc/dovecot
diff options
context:
space:
mode:
Diffstat (limited to 'roles/IMAP/files/etc/dovecot')
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf17
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf427
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf73
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/15-lda.conf48
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/15-mailboxes.conf76
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/20-imap.conf108
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf27
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/90-plugin.conf28
-rw-r--r--roles/IMAP/files/etc/dovecot/conf.d/90-sieve.conf214
-rw-r--r--roles/IMAP/files/etc/dovecot/ssl/config2
10 files changed, 10 insertions, 1010 deletions
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf
index 7213fbb..f34bdeb 100644
--- a/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf
+++ b/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf
@@ -10,7 +10,7 @@
#disable_plaintext_auth = yes
# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
-# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+# bsdauth and PAM require cache_key to be set for caching to be used.
#auth_cache_size = 0
# Time to live for cached data. After TTL expires the cached record is no
# longer used, *except* if the main database lookup returns internal failure.
@@ -30,7 +30,7 @@
# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
-auth_default_realm = fripost.org
+#auth_default_realm =
# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
@@ -48,7 +48,7 @@ auth_default_realm = fripost.org
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
-auth_username_format = %Lu
+#auth_username_format = %Lu
# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
@@ -73,7 +73,7 @@ auth_username_format = %Lu
# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
# default (usually /etc/krb5.keytab) if not specified. You may need to change
# the auth service to run as root to be able to read this file.
-#auth_krb5_keytab =
+#auth_krb5_keytab =
# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
@@ -88,16 +88,16 @@ auth_username_format = %Lu
# Require a valid SSL client certificate or the authentication fails.
#auth_ssl_require_client_cert = no
-# Take the username from client's SSL certificate, using
+# Take the username from client's SSL certificate, using
# X509_NAME_get_text_by_NID() which returns the subject's DN's
-# CommonName.
+# CommonName.
#auth_ssl_username_from_cert = no
# Space separated list of wanted authentication mechanisms:
-# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp
# gss-spnego
# NOTE: See also disable_plaintext_auth setting.
-auth_mechanisms = plain login
+auth_mechanisms = plain
##
## Password and user databases
@@ -124,5 +124,4 @@ auth_mechanisms = plain login
!include auth-ldap.conf.ext
#!include auth-passwdfile.conf.ext
#!include auth-checkpassword.conf.ext
-#!include auth-vpopmail.conf.ext
#!include auth-static.conf.ext
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf
deleted file mode 100644
index d74b026..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf
+++ /dev/null
@@ -1,427 +0,0 @@
-##
-## Mailbox locations and namespaces
-##
-
-# Location for users' mailboxes. The default is empty, which means that Dovecot
-# tries to find the mailboxes automatically. This won't work if the user
-# doesn't yet have any mail, so you should explicitly tell Dovecot the full
-# location.
-#
-# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
-# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
-# kept. This is called the "root mail directory", and it must be the first
-# path given in the mail_location setting.
-#
-# There are a few special variables you can use, eg.:
-#
-# %u - username
-# %n - user part in user@domain, same as %u if there's no domain
-# %d - domain part in user@domain, empty if there's no domain
-# %h - home directory
-#
-# See doc/wiki/Variables.txt for full list. Some examples:
-#
-# mail_location = maildir:~/Maildir
-# mail_location = mbox:~/mail:INBOX=/var/mail/%u
-# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
-#
-# <doc/wiki/MailLocation.txt>
-#
-mail_location = mdbox:~/mail
-
-# If you need to set multiple mailbox locations or want to change default
-# namespace settings, you can do it by defining namespace sections.
-#
-# You can have private, shared and public namespaces. Private namespaces
-# are for user's personal mails. Shared namespaces are for accessing other
-# users' mailboxes that have been shared. Public namespaces are for shared
-# mailboxes that are managed by sysadmin. If you create any shared or public
-# namespaces you'll typically want to enable ACL plugin also, otherwise all
-# users can access all the shared mailboxes, assuming they have permissions
-# on filesystem level to do so.
-namespace inbox {
- # Namespace type: private, shared or public
- #type = private
-
- # Hierarchy separator to use. You should use the same separator for all
- # namespaces or some clients get confused. '/' is usually a good one.
- # The default however depends on the underlying mail storage format.
- separator = /
-
- # Prefix required to access this namespace. This needs to be different for
- # all namespaces. For example "Public/".
- #prefix =
-
- # Physical location of the mailbox. This is in same format as
- # mail_location, which is also the default for it.
- #location =
-
- # There can be only one INBOX, and this setting defines which namespace
- # has it.
- inbox = yes
-
- # If namespace is hidden, it's not advertised to clients via NAMESPACE
- # extension. You'll most likely also want to set list=no. This is mostly
- # useful when converting from another server with different namespaces which
- # you want to deprecate but still keep working. For example you can create
- # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
- #hidden = no
-
- # Show the mailboxes under this namespace with LIST command. This makes the
- # namespace visible for clients that don't support NAMESPACE extension.
- # "children" value lists child mailboxes, but hides the namespace prefix.
- #list = yes
-
- # Namespace handles its own subscriptions. If set to "no", the parent
- # namespace handles them (empty prefix should always have this as "yes")
- #subscriptions = yes
-}
-
-namespace virtual {
- prefix = virtual/
- separator = /
- location = virtual:/etc/dovecot/virtual:INDEX=MEMORY
- list = no
- hidden = no
- subscriptions = no
-}
-
-# Example shared namespace configuration
-#namespace {
- #type = shared
- #separator = /
-
- # Mailboxes are visible under "shared/user@domain/"
- # %%n, %%d and %%u are expanded to the destination user.
- #prefix = shared/%%u/
-
- # Mail location for other users' mailboxes. Note that %variables and ~/
- # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
- # destination user's data.
- #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
-
- # Use the default namespace for saving subscriptions.
- #subscriptions = no
-
- # List the shared/ namespace only if there are visible shared mailboxes.
- #list = children
-#}
-# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
-#mail_shared_explicit_inbox = no
-
-# System user and group used to access mails. If you use multiple, userdb
-# can override these by returning uid or gid fields. You can use either numbers
-# or names. <doc/wiki/UserIds.txt>
-mail_uid = vmail
-mail_gid = vmail
-
-# Group to enable temporarily for privileged operations. Currently this is
-# used only with INBOX when either its initial creation or dotlocking fails.
-# Typically this is set to "mail" to give access to /var/mail.
-mail_privileged_group =
-
-# Grant access to these supplementary groups for mail processes. Typically
-# these are used to set up access to shared mailboxes. Note that it may be
-# dangerous to set these if users can create symlinks (e.g. if "mail" group is
-# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
-# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
-#mail_access_groups =
-
-# Allow full filesystem access to clients. There's no access checks other than
-# what the operating system does for the active UID/GID. It works with both
-# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
-# or ~user/.
-#mail_full_filesystem_access = no
-
-# Dictionary for key=value mailbox attributes. This is used for example by
-# URLAUTH and METADATA extensions.
-#mail_attribute_dict =
-
-# A comment or note that is associated with the server. This value is
-# accessible for authenticated users through the IMAP METADATA server
-# entry "/shared/comment".
-mail_server_comment = "fripost - demokratisk e-post"
-
-# Indicates a method for contacting the server administrator. According to
-# RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that
-# is currently not enforced. Use for example mailto:admin@example.com. This
-# value is accessible for authenticated users through the IMAP METADATA server
-# entry "/shared/admin".
-mail_server_admin = mailto:postmaster@fripost.org
-
-##
-## Mail processes
-##
-
-# Don't use mmap() at all. This is required if you store indexes to shared
-# filesystems (NFS or clustered filesystem).
-#mmap_disable = no
-
-# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
-# since version 3, so this should be safe to use nowadays by default.
-#dotlock_use_excl = yes
-
-# When to use fsync() or fdatasync() calls:
-# optimized (default): Whenever necessary to avoid losing important data
-# always: Useful with e.g. NFS when write()s are delayed
-# never: Never use it (best performance, but crashes can lose data)
-#mail_fsync = optimized
-
-# Locking method for index files. Alternatives are fcntl, flock and dotlock.
-# Dotlocking uses some tricks which may create more disk I/O than other locking
-# methods. NFS users: flock doesn't work, remember to change mmap_disable.
-#lock_method = fcntl
-
-# Directory where mails can be temporarily stored. Usually it's used only for
-# mails larger than >= 128 kB. It's used by various parts of Dovecot, for
-# example LDA/LMTP while delivering large mails or zlib plugin for keeping
-# uncompressed mails.
-#mail_temp_dir = /tmp
-
-# Valid UID range for users, defaults to 500 and above. This is mostly
-# to make sure that users can't log in as daemons or other system users.
-# Note that denying root logins is hardcoded to dovecot binary and can't
-# be done even if first_valid_uid is set to 0.
-first_valid_uid = 1
-#last_valid_uid = 0
-
-# Valid GID range for users, defaults to non-root/wheel. Users having
-# non-valid GID as primary group ID aren't allowed to log in. If user
-# belongs to supplementary groups with non-valid GIDs, those groups are
-# not set.
-#first_valid_gid = 1
-#last_valid_gid = 0
-
-# Maximum allowed length for mail keyword name. It's only forced when trying
-# to create new keywords.
-#mail_max_keyword_length = 50
-
-# ':' separated list of directories under which chrooting is allowed for mail
-# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
-# This setting doesn't affect login_chroot, mail_chroot or auth chroot
-# settings. If this setting is empty, "/./" in home dirs are ignored.
-# WARNING: Never add directories here which local users can modify, that
-# may lead to root exploit. Usually this should be done only if you don't
-# allow shell access for users. <doc/wiki/Chrooting.txt>
-#valid_chroot_dirs =
-
-# Default chroot directory for mail processes. This can be overridden for
-# specific users in user database by giving /./ in user's home directory
-# (eg. /home/./user chroots into /home). Note that usually there is no real
-# need to do chrooting, Dovecot doesn't allow users to access files outside
-# their mail directory anyway. If your home directories are prefixed with
-# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
-#mail_chroot =
-
-# UNIX socket path to master authentication server to find users.
-# This is used by imap (for shared users) and lda.
-#auth_socket_path = /var/run/dovecot/auth-userdb
-
-# Directory where to look up mail plugins.
-#mail_plugin_dir = /usr/lib/dovecot/modules
-
-# Space separated list of plugins to load for all services. Plugins specific to
-# IMAP, LDA, etc. are added to this list in their own .conf files.
-mail_plugins = quota virtual zlib
-
-##
-## Mailbox handling optimizations
-##
-
-# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
-# also required for IMAP NOTIFY extension to be enabled.
-#mailbox_list_index = yes
-
-# Trust mailbox list index to be up-to-date. This reduces disk I/O at the cost
-# of potentially returning out-of-date results after e.g. server crashes.
-# The results will be automatically fixed once the folders are opened.
-#mailbox_list_index_very_dirty_syncs = yes
-
-# Should INBOX be kept up-to-date in the mailbox list index? By default it's
-# not, because most of the mailbox accesses will open INBOX anyway.
-#mailbox_list_index_include_inbox = no
-
-# The minimum number of mails in a mailbox before updates are done to cache
-# file. This allows optimizing Dovecot's behavior to do less disk writes at
-# the cost of more disk reads.
-#mail_cache_min_mail_count = 0
-
-# When IDLE command is running, mailbox is checked once in a while to see if
-# there are any new mails or other changes. This setting defines the minimum
-# time to wait between those checks. Dovecot can also use inotify and
-# kqueue to find out immediately when changes occur.
-#mailbox_idle_check_interval = 30 secs
-
-# Save mails with CR+LF instead of plain LF. This makes sending those mails
-# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
-# But it also creates a bit more disk I/O which may just make it slower.
-# Also note that if other software reads the mboxes/maildirs, they may handle
-# the extra CRs wrong and cause problems.
-#mail_save_crlf = no
-
-# Max number of mails to keep open and prefetch to memory. This only works with
-# some mailbox formats and/or operating systems.
-#mail_prefetch_count = 0
-
-# How often to scan for stale temporary files and delete them (0 = never).
-# These should exist only after Dovecot dies in the middle of saving mails.
-#mail_temp_scan_interval = 1w
-
-# How many slow mail accesses sorting can perform before it returns failure.
-# With IMAP the reply is: NO [LIMIT] Requested sort would have taken too long.
-# The untagged SORT reply is still returned, but it's likely not correct.
-#mail_sort_max_read_count = 0
-
-protocol !indexer-worker {
- # If folder vsize calculation requires opening more than this many mails from
- # disk (i.e. mail sizes aren't in cache already), return failure and finish
- # the calculation via indexer process. Disabled by default. This setting must
- # be 0 for indexer-worker processes.
- #mail_vsize_bg_after_count = 0
-}
-
-##
-## Maildir-specific settings
-##
-
-# By default LIST command returns all entries in maildir beginning with a dot.
-# Enabling this option makes Dovecot return only entries which are directories.
-# This is done by stat()ing each entry, so it causes more disk I/O.
-# (For systems setting struct dirent->d_type, this check is free and it's
-# done always regardless of this setting)
-#maildir_stat_dirs = no
-
-# When copying a message, do it with hard links whenever possible. This makes
-# the performance much better, and it's unlikely to have any side effects.
-#maildir_copy_with_hardlinks = yes
-
-# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
-# when its mtime changes unexpectedly or when we can't find the mail otherwise.
-#maildir_very_dirty_syncs = no
-
-# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
-# getting the mail's physical size, except when recalculating Maildir++ quota.
-# This can be useful in systems where a lot of the Maildir filenames have a
-# broken size. The performance hit for enabling this is very small.
-#maildir_broken_filename_sizes = no
-
-# Always move mails from new/ directory to cur/, even when the \Recent flags
-# aren't being reset.
-#maildir_empty_new = no
-
-##
-## mbox-specific settings
-##
-
-# Which locking methods to use for locking mbox. There are four available:
-# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
-# solution. If you want to use /var/mail/ like directory, the users
-# will need write access to that directory.
-# dotlock_try: Same as dotlock, but if it fails because of permissions or
-# because there isn't enough disk space, just skip it.
-# fcntl : Use this if possible. Works with NFS too if lockd is used.
-# flock : May not exist in all systems. Doesn't work with NFS.
-# lockf : May not exist in all systems. Doesn't work with NFS.
-#
-# You can use multiple locking methods; if you do the order they're declared
-# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
-# locking methods as well. Some operating systems don't allow using some of
-# them simultaneously.
-#
-# The Debian value for mbox_write_locks differs from upstream Dovecot. It is
-# changed to be compliant with Debian Policy (section 11.6) for NFS safety.
-# Dovecot: mbox_write_locks = dotlock fcntl
-# Debian: mbox_write_locks = fcntl dotlock
-#
-#mbox_read_locks = fcntl
-#mbox_write_locks = fcntl dotlock
-
-# Maximum time to wait for lock (all of them) before aborting.
-#mbox_lock_timeout = 5 mins
-
-# If dotlock exists but the mailbox isn't modified in any way, override the
-# lock file after this much time.
-#mbox_dotlock_change_timeout = 2 mins
-
-# When mbox changes unexpectedly we have to fully read it to find out what
-# changed. If the mbox is large this can take a long time. Since the change
-# is usually just a newly appended mail, it'd be faster to simply read the
-# new mails. If this setting is enabled, Dovecot does this but still safely
-# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
-# how it's expected to be. The only real downside to this setting is that if
-# some other MUA changes message flags, Dovecot doesn't notice it immediately.
-# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
-# commands.
-#mbox_dirty_syncs = yes
-
-# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
-# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
-#mbox_very_dirty_syncs = no
-
-# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
-# commands and when closing the mailbox). This is especially useful for POP3
-# where clients often delete all mails. The downside is that our changes
-# aren't immediately visible to other MUAs.
-#mbox_lazy_writes = yes
-
-# If mbox size is smaller than this (e.g. 100k), don't write index files.
-# If an index file already exists it's still read, just not updated.
-#mbox_min_index_size = 0
-
-# Mail header selection algorithm to use for MD5 POP3 UIDLs when
-# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
-# algorithm, but it fails if the first Received: header isn't unique in all
-# mails. An alternative algorithm is "all" that selects all headers.
-#mbox_md5 = apop3d
-
-##
-## mdbox-specific settings
-##
-
-# Maximum dbox file size until it's rotated.
-#mdbox_rotate_size = 10M
-
-# Maximum dbox file age until it's rotated. Typically in days. Day begins
-# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
-#mdbox_rotate_interval = 0
-
-# When creating new mdbox files, immediately preallocate their size to
-# mdbox_rotate_size. This setting currently works only in Linux with some
-# filesystems (ext4, xfs).
-mdbox_preallocate_space = yes
-
-##
-## Mail attachments
-##
-
-# sdbox and mdbox support saving mail attachments to external files, which
-# also allows single instance storage for them. Other backends don't support
-# this for now.
-
-# Directory root where to store mail attachments. Disabled, if empty.
-mail_attachment_dir = /home/mail/attachments
-
-# Attachments smaller than this aren't saved externally. It's also possible to
-# write a plugin to disable saving specific attachments externally.
-#mail_attachment_min_size = 128k
-
-# Filesystem backend to use for saving attachments:
-# posix : No SiS done by Dovecot (but this might help FS's own deduplication)
-# sis posix : SiS with immediate byte-by-byte comparison during saving
-# sis-queue posix : SiS with delayed comparison and deduplication
-mail_attachment_fs = sis-queue /home/mail/attachments/queue:posix
-
-# Hash format to use in attachment filenames. You can add any text and
-# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
-# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
-mail_attachment_hash = %{sha256}
-
-# Settings to control adding $HasAttachment or $HasNoAttachment keywords.
-# By default, all MIME parts with Content-Disposition=attachment, or inlines
-# with filename parameter are consired attachments.
-# add-flags-on-save - Add the keywords when saving new mails.
-# content-type=type or !type - Include/exclude content type. Excluding will
-# never consider the matched MIME part as attachment. Including will only
-# negate an exclusion (e.g. content-type=!foo/* content-type=foo/bar).
-# exclude-inlined - Exclude any Content-Disposition=inline MIME part.
-#mail_attachment_detection_options =
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf
deleted file mode 100644
index adeb879..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf
+++ /dev/null
@@ -1,73 +0,0 @@
-##
-## SSL settings
-##
-
-# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
-ssl = required
-
-# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
-# dropping root privileges, so keep the key file unreadable by anyone but
-# root. Included doc/mkcert.sh can be used to easily generate self-signed
-# certificate, just make sure to update the domains in dovecot-openssl.cnf
-ssl_cert = </etc/dovecot/ssl/imap.fripost.org.pem
-ssl_key = </etc/dovecot/ssl/imap.fripost.org.key
-
-# If key file is password protected, give the password here. Alternatively
-# give it when starting dovecot with -p parameter. Since this file is often
-# world-readable, you may want to place this setting instead to a different
-# root owned 0600 file by using ssl_key_password = <path.
-#ssl_key_password =
-
-# PEM encoded trusted certificate authority. Set this only if you intend to use
-# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
-# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
-#ssl_ca =
-
-# Require that CRL check succeeds for client certificates.
-#ssl_require_crl = yes
-
-# Directory and/or file for trusted SSL CA certificates. These are used only
-# when Dovecot needs to act as an SSL client (e.g. imapc backend or
-# submission service). The directory is usually /etc/ssl/certs in
-# Debian-based systems and the file is /etc/pki/tls/cert.pem in
-# RedHat-based systems.
-ssl_client_ca_dir = /etc/ssl/certs
-#ssl_client_ca_file =
-
-# Request client to send a certificate. If you also want to require it, set
-# auth_ssl_require_client_cert=yes in auth section.
-#ssl_verify_client_cert = no
-
-# Which field from certificate to use for username. commonName and
-# x500UniqueIdentifier are the usual choices. You'll also need to set
-# auth_ssl_username_from_cert=yes.
-#ssl_cert_username_field = commonName
-
-# SSL DH parameters
-# Generate new params with `openssl dhparam -out /etc/dovecot/dh.pem 4096`
-# Or migrate from old ssl-parameters.dat file with the command dovecot
-# gives on startup when ssl_dh is unset.
-ssl_dh = </etc/ssl/dhparams.pem
-
-# Minimum SSL protocol version to use. Potentially recognized values are SSLv3,
-# TLSv1, TLSv1.1, and TLSv1.2, depending on the OpenSSL version used.
-ssl_min_protocol = TLSv1.2
-
-# SSL ciphers to use
-ssl_cipher_list = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
-
-# Colon separated list of elliptic curves to use. Empty value (the default)
-# means use the defaults from the SSL library. P-521:P-384:P-256 would be an
-# example of a valid value.
-#ssl_curve_list =
-
-# Prefer the server's order of ciphers over client's.
-#ssl_prefer_server_ciphers = no
-
-# SSL crypto device to use, for valid values run "openssl engine"
-#ssl_crypto_device =
-
-# SSL extra options. Currently supported options are:
-# compression - Enable compression.
-# no_ticket - Disable SSL session tickets.
-#ssl_options =
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/15-lda.conf b/roles/IMAP/files/etc/dovecot/conf.d/15-lda.conf
deleted file mode 100644
index 4bfd8a5..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/15-lda.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-##
-## LDA specific settings (also used by LMTP)
-##
-
-# Address to use when sending rejection mails.
-# Default is postmaster@%d. %d expands to recipient domain.
-#postmaster_address =
-
-# Hostname to use in various parts of sent mails (e.g. in Message-Id) and
-# in LMTP replies. Default is the system's real hostname@domain.
-#hostname =
-
-# If user is over quota, return with temporary failure instead of
-# bouncing the mail.
-#quota_full_tempfail = no
-
-# Binary to use for sending mails.
-sendmail_path = /usr/sbin/postmulti -i msa -x /usr/sbin/sendmail
-
-# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
-#submission_host =
-
-# Subject: header to use for rejection mails. You can use the same variables
-# as for rejection_reason below.
-#rejection_subject = Rejected: %s
-
-# Human readable error message for rejection mails. You can use variables:
-# %n = CRLF, %r = reason, %s = original subject, %t = recipient
-#rejection_reason = Your message to <%t> was automatically rejected:%n%r
-
-# Delimiter character between local-part and detail in email address.
-#recipient_delimiter = +
-
-# Header where the original recipient address (SMTP's RCPT TO: address) is taken
-# from if not available elsewhere. With dovecot-lda -a parameter overrides this.
-# A commonly used header for this is X-Original-To.
-#lda_original_recipient_header =
-
-# Should saving a mail to a nonexistent mailbox automatically create it?
-#lda_mailbox_autocreate = no
-
-# Should automatically created mailboxes be also automatically subscribed?
-#lda_mailbox_autosubscribe = no
-
-protocol lda {
- # Space separated list of plugins to load (default is global mail_plugins).
- #mail_plugins = $mail_plugins
-}
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/15-mailboxes.conf b/roles/IMAP/files/etc/dovecot/conf.d/15-mailboxes.conf
deleted file mode 100644
index 9c330be..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/15-mailboxes.conf
+++ /dev/null
@@ -1,76 +0,0 @@
-##
-## Mailbox definitions
-##
-
-# Each mailbox is specified in a separate mailbox section. The section name
-# specifies the mailbox name. If it has spaces, you can put the name
-# "in quotes". These sections can contain the following mailbox settings:
-#
-# auto:
-# Indicates whether the mailbox with this name is automatically created
-# implicitly when it is first accessed. The user can also be automatically
-# subscribed to the mailbox after creation. The following values are
-# defined for this setting:
-#
-# no - Never created automatically.
-# create - Automatically created, but no automatic subscription.
-# subscribe - Automatically created and subscribed.
-#
-# special_use:
-# A space-separated list of SPECIAL-USE flags (RFC 6154) to use for the
-# mailbox. There are no validity checks, so you could specify anything
-# you want in here, but it's not a good idea to use flags other than the
-# standard ones specified in the RFC:
-#
-# \All - This (virtual) mailbox presents all messages in the
-# user's message store.
-# \Archive - This mailbox is used to archive messages.
-# \Drafts - This mailbox is used to hold draft messages.
-# \Flagged - This (virtual) mailbox presents all messages in the
-# user's message store marked with the IMAP \Flagged flag.
-# \Junk - This mailbox is where messages deemed to be junk mail
-# are held.
-# \Sent - This mailbox is used to hold copies of messages that
-# have been sent.
-# \Trash - This mailbox is used to hold messages that have been
-# deleted.
-#
-# comment:
-# Defines a default comment or note associated with the mailbox. This
-# value is accessible through the IMAP METADATA mailbox entries
-# "/shared/comment" and "/private/comment". Users with sufficient
-# privileges can override the default value for entries with a custom
-# value.
-
-# NOTE: Assumes "namespace inbox" has been defined in 10-mail.conf.
-namespace inbox {
- # These mailboxes are widely used and could perhaps be created automatically:
- mailbox Trash {
- auto = create
- special_use = \Trash
- }
- mailbox Drafts {
- auto = create
- special_use = \Drafts
- }
- mailbox Sent {
- auto = subscribe
- special_use = \Sent
- }
- mailbox Junk {
- auto = create
- special_use = \Junk
- }
-
- # If you have a virtual "All messages" mailbox:
- mailbox virtual/All {
- special_use = \All
- comment = All messages
- }
-
- # If you have a virtual "Flagged" mailbox:
- mailbox virtual/Flagged {
- special_use = \Flagged
- comment = All flagged messages
- }
-}
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/20-imap.conf b/roles/IMAP/files/etc/dovecot/conf.d/20-imap.conf
deleted file mode 100644
index de1fbbb..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/20-imap.conf
+++ /dev/null
@@ -1,108 +0,0 @@
-##
-## IMAP specific settings
-##
-
-# If nothing happens for this long while client is IDLEing, move the connection
-# to imap-hibernate process and close the old imap process. This saves memory,
-# because connections use very little memory in imap-hibernate process. The
-# downside is that recreating the imap process back uses some resources.
-imap_hibernate_timeout = 15s
-
-# Maximum IMAP command line length. Some clients generate very long command
-# lines with huge mailboxes, so you may need to raise this if you get
-# "Too long argument" or "IMAP command line too large" errors often.
-#imap_max_line_length = 64k
-
-# IMAP logout format string:
-# %i - total number of bytes read from client
-# %o - total number of bytes sent to client
-# %{fetch_hdr_count} - Number of mails with mail header data sent to client
-# %{fetch_hdr_bytes} - Number of bytes with mail header data sent to client
-# %{fetch_body_count} - Number of mails with mail body data sent to client
-# %{fetch_body_bytes} - Number of bytes with mail body data sent to client
-# %{deleted} - Number of mails where client added \Deleted flag
-# %{expunged} - Number of mails that client expunged, which does not
-# include automatically expunged mails
-# %{autoexpunged} - Number of mails that were automatically expunged after
-# client disconnected
-# %{trashed} - Number of mails that client copied/moved to the
-# special_use=\Trash mailbox.
-# %{appended} - Number of mails saved during the session
-#imap_logout_format = in=%i out=%o deleted=%{deleted} expunged=%{expunged} \
-# trashed=%{trashed} hdr_count=%{fetch_hdr_count} \
-# hdr_bytes=%{fetch_hdr_bytes} body_count=%{fetch_body_count} \
-# body_bytes=%{fetch_body_bytes}
-
-# Override the IMAP CAPABILITY response. If the value begins with '+',
-# add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
-#imap_capability =
-
-# How long to wait between "OK Still here" notifications when client is
-# IDLEing.
-#imap_idle_notify_interval = 2 mins
-
-# ID field names and values to send to clients. Using * as the value makes
-# Dovecot use the default value. The following fields have default values
-# currently: name, version, os, os-version, support-url, support-email.
-#imap_id_send =
-
-# ID fields sent by client to log. * means everything.
-#imap_id_log =
-
-# Workarounds for various client bugs:
-# delay-newmail:
-# Send EXISTS/RECENT new mail notifications only when replying to NOOP
-# and CHECK commands. Some clients ignore them otherwise, for example OSX
-# Mail (<v2.1). Outlook Express breaks more badly though, without this it
-# may show user "Message no longer in server" errors. Note that OE6 still
-# breaks even with this workaround if synchronization is set to
-# "Headers Only".
-# tb-extra-mailbox-sep:
-# Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
-# adds extra '/' suffixes to mailbox names. This option causes Dovecot to
-# ignore the extra '/' instead of treating it as invalid mailbox name.
-# tb-lsub-flags:
-# Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
-# This makes Thunderbird realize they aren't selectable and show them
-# greyed out, instead of only later giving "not selectable" popup error.
-#
-# The list is space-separated.
-#imap_client_workarounds =
-
-# Host allowed in URLAUTH URLs sent by client. "*" allows all.
-#imap_urlauth_host =
-
-# Enable IMAP LITERAL- extension (replaces LITERAL+)
-#imap_literal_minus = no
-
-# What happens when FETCH fails due to some internal error:
-# disconnect-immediately:
-# The FETCH is aborted immediately and the IMAP client is disconnected.
-# disconnect-after:
-# The FETCH runs for all the requested mails returning as much data as
-# possible. The client is finally disconnected without a tagged reply.
-# no-after:
-# Same as disconnect-after, but tagged NO reply is sent instead of
-# disconnecting the client. If the client attempts to FETCH the same failed
-# mail more than once, the client is disconnected. This is to avoid clients
-# from going into infinite loops trying to FETCH a broken mail.
-#imap_fetch_failure = disconnect-immediately
-
-protocol imap {
- # Space separated list of plugins to load (default is global mail_plugins).
- mail_plugins = $mail_plugins imap_zlib
-
- # Maximum number of IMAP connections allowed for a user from each IP address.
- # NOTE: The username is compared case-sensitively.
- mail_max_userip_connections = 16
-
-# # TODO Load the 'antispam' plugin for people using the content filter.
-# # (Otherwise fallback to the static userdb.)
-# userdb {
-# driver = ldap
-# args = /etc/dovecot/dovecot-ldap-userdb.conf.ext
-#
-# # Default fields can be used to specify defaults that LDAP may override
-# default_fields = home=/home/mail/virtual/%d/%n
-# }
-}
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf b/roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf
deleted file mode 100644
index 8fc5fa0..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-##
-## LMTP specific settings
-##
-
-# Support proxying to other LMTP/SMTP servers by performing passdb lookups.
-#lmtp_proxy = no
-
-# When recipient address includes the detail (e.g. user+detail), try to save
-# the mail to the detail mailbox. See also recipient_delimiter and
-# lda_mailbox_autocreate settings.
-#lmtp_save_to_detail_mailbox = no
-
-# Verify quota before replying to RCPT TO. This adds a small overhead.
-#lmtp_rcpt_check_quota = no
-
-# Which recipient address to use for Delivered-To: header and Received:
-# header. The default is "final", which is the same as the one given to
-# RCPT TO command. "original" uses the address given in RCPT TO's ORCPT
-# parameter, "none" uses nothing. Note that "none" is currently always used
-# when a mail has multiple recipients.
-#lmtp_hdr_delivery_address = final
-
-protocol lmtp {
- postmaster_address = postmaster@fripost.org
- # Space separated list of plugins to load (default is global mail_plugins).
- mail_plugins = $mail_plugins sieve
-}
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/90-plugin.conf b/roles/IMAP/files/etc/dovecot/conf.d/90-plugin.conf
deleted file mode 100644
index 52a81ca..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/90-plugin.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-##
-## Plugin settings
-##
-
-# All wanted plugins must be listed in mail_plugins setting before any of the
-# settings take effect. See <doc/wiki/Plugins.txt> for list of plugins and
-# their configuration. Note that %variable expansion is done for all values.
-
-plugin {
- antispam_backend = spool2dir
-
- antispam_trash = Trash
- antispam_unsure_pattern_ignorecase = MailTrain;MailTrain/*
- antispam_spam = Junk
-
- # The first %%lu is replaced by the current time.
- # The second %%lu is replaced by a counter to generate unique names.
- # These two tokens MUST be present in the template!
- antispam_spool2dir_spam = /home/mail/spamspool/%u-%%10lu-%%06lu.spam
- antispam_spool2dir_notspam = /home/mail/spamspool/%u-%%10lu-%%06lu.ham
-
- quota_rule = *:storage=0
- quota = count:User quota
- quota_vsizes = yes
-
- zlib_save = gz
- zlib_save_level = 6
-}
diff --git a/roles/IMAP/files/etc/dovecot/conf.d/90-sieve.conf b/roles/IMAP/files/etc/dovecot/conf.d/90-sieve.conf
deleted file mode 100644
index c1ff93e..0000000
--- a/roles/IMAP/files/etc/dovecot/conf.d/90-sieve.conf
+++ /dev/null
@@ -1,214 +0,0 @@
-##
-## Settings for the Sieve interpreter
-##
-
-# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
-# by adding it to the respective mail_plugins= settings.
-
-# The Sieve interpreter can retrieve Sieve scripts from several types of
-# locations. The default `file' location type is a local filesystem path
-# pointing to a Sieve script file or a directory containing multiple Sieve
-# script files. More complex setups can use other location types such as
-# `ldap' or `dict' to fetch Sieve scripts from remote databases.
-#
-# All settings that specify the location of one ore more Sieve scripts accept
-# the following syntax:
-#
-# location = [<type>:]path[;<option>[=<value>][;...]]
-#
-# If the type prefix is omitted, the script location type is 'file' and the
-# location is interpreted as a local filesystem path pointing to a Sieve script
-# file or directory. Refer to Pigeonhole wiki or INSTALL file for more
-# information.
-
-plugin {
- # The location of the user's main Sieve script or script storage. The LDA
- # Sieve plugin uses this to find the active script for Sieve filtering at
- # delivery. The "include" extension uses this location for retrieving
- # :personal" scripts. This is also where the ManageSieve service will store
- # the user's scripts, if supported.
- #
- # Currently only the 'file:' location type supports ManageSieve operation.
- # Other location types like 'dict:' and 'ldap:' can currently only
- # be used as a read-only script source ().
- #
- # For the 'file:' type: use the ';active=' parameter to specify where the
- # active script symlink is located.
- # For other types: use the ';name=' parameter to specify the name of the
- # default/active script.
- sieve = file:~/sieve;active=~/dovecot.sieve
-
- # The default Sieve script when the user has none. This is the location of a
- # global sieve script file, which gets executed ONLY if user's personal Sieve
- # script doesn't exist. Be sure to pre-compile this script manually using the
- # sievec command line tool if the binary is not stored in a global location.
- # --> See sieve_before for executing scripts before the user's personal
- # script.
- #sieve_default = /var/lib/dovecot/sieve/default.sieve
-
- # The name by which the default Sieve script (as configured by the
- # sieve_default setting) is visible to the user through ManageSieve.
- #sieve_default_name =
-
- # Location for ":global" include scripts as used by the "include" extension.
- #sieve_global =
-
- # The location of a Sieve script that is run for any message that is about to
- # be discarded; i.e., it is not delivered anywhere by the normal Sieve
- # execution. This only happens when the "implicit keep" is canceled, by e.g.
- # the "discard" action, and no actions that deliver the message are executed.
- # This "discard script" can prevent discarding the message, by executing
- # alternative actions. If the discard script does nothing, the message is
- # still discarded as it would be when no discard script is configured.
- #sieve_discard =
-
- # Location Sieve of scripts that need to be executed before the user's
- # personal script. If a 'file' location path points to a directory, all the
- # Sieve scripts contained therein (with the proper `.sieve' extension) are
- # executed. The order of execution within that directory is determined by the
- # file names, using a normal 8bit per-character comparison.
- #
- # Multiple script locations can be specified by appending an increasing number
- # to the setting name. The Sieve scripts found from these locations are added
- # to the script execution sequence in the specified order. Reading the
- # numbered sieve_before settings stops at the first missing setting, so no
- # numbers may be skipped.
- #sieve_before = /var/lib/dovecot/sieve.d/
- #sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain
- #sieve_before3 = (etc...)
-
- # Identical to sieve_before, only the specified scripts are executed after the
- # user's script (only when keep is still in effect!). Multiple script
- # locations can be specified by appending an increasing number.
- #sieve_after =
- #sieve_after2 =
- #sieve_after2 = (etc...)
-
- # Which Sieve language extensions are available to users. By default, all
- # supported extensions are available, except for deprecated extensions or
- # those that are still under development. Some system administrators may want
- # to disable certain Sieve extensions or enable those that are not available
- # by default. This setting can use '+' and '-' to specify differences relative
- # to the default. For example `sieve_extensions = +imapflags' will enable the
- # deprecated imapflags extension in addition to all extensions were already
- # enabled by default.
- sieve_extensions = +editheader
-
- # Which Sieve language extensions are ONLY available in global scripts. This
- # can be used to restrict the use of certain Sieve extensions to administrator
- # control, for instance when these extensions can cause security concerns.
- # This setting has higher precedence than the `sieve_extensions' setting
- # (above), meaning that the extensions enabled with this setting are never
- # available to the user's personal script no matter what is specified for the
- # `sieve_extensions' setting. The syntax of this setting is similar to the
- # `sieve_extensions' setting, with the difference that extensions are
- # enabled or disabled for exclusive use in global scripts. Currently, no
- # extensions are marked as such by default.
- #sieve_global_extensions =
-
- # The Pigeonhole Sieve interpreter can have plugins of its own. Using this
- # setting, the used plugins can be specified. Check the Dovecot wiki
- # (wiki2.dovecot.org) or the pigeonhole website
- # (http://pigeonhole.dovecot.org) for available plugins.
- # The sieve_extprograms plugin is included in this release.
- #sieve_plugins =
-
- # The separator that is expected between the :user and :detail
- # address parts introduced by the subaddress extension. This may
- # also be a sequence of characters (e.g. '--'). The current
- # implementation looks for the separator from the left of the
- # localpart and uses the first one encountered. The :user part is
- # left of the separator and the :detail part is right. This setting
- # is also used by Dovecot's LMTP service.
- recipient_delimiter = +
-
- # The maximum size of a Sieve script. The compiler will refuse to compile any
- # script larger than this limit. If set to 0, no limit on the script size is
- # enforced.
- #sieve_max_script_size = 1M
-
- # The maximum number of actions that can be performed during a single script
- # execution. If set to 0, no limit on the total number of actions is enforced.
- #sieve_max_actions = 32
-
- # The maximum number of redirect actions that can be performed during a single
- # script execution. If set to 0, no redirect actions are allowed.
- #sieve_max_redirects = 4
-
- # The maximum number of personal Sieve scripts a single user can have. If set
- # to 0, no limit on the number of scripts is enforced.
- # (Currently only relevant for ManageSieve)
- #sieve_quota_max_scripts = 0
-
- # The maximum amount of disk storage a single user's scripts may occupy. If
- # set to 0, no limit on the used amount of disk storage is enforced.
- # (Currently only relevant for ManageSieve)
- #sieve_quota_max_storage = 0
-
- # The primary e-mail address for the user. This is used as a default when no
- # other appropriate address is available for sending messages. If this setting
- # is not configured, either the postmaster or null "<>" address is used as a
- # sender, depending on the action involved. This setting is important when
- # there is no message envelope to extract addresses from, such as when the
- # script is executed in IMAP.
- #sieve_user_email =
-
- # The path to the file where the user log is written. If not configured, a
- # default location is used. If the main user's personal Sieve (as configured
- # with sieve=) is a file, the logfile is set to <filename>.log by default. If
- # it is not a file, the default user log file is ~/.dovecot.sieve.log.
- #sieve_user_log =
-
- # Specifies what envelope sender address is used for redirected messages.
- # The following values are supported for this setting:
- #
- # "sender" - The sender address is used (default).
- # "recipient" - The final recipient address is used.
- # "orig_recipient" - The original recipient is used.
- # "user_email" - The user's primary address is used. This is
- # configured with the "sieve_user_email" setting. If
- # that setting is unconfigured, "user_mail" is equal to
- # "recipient".
- # "postmaster" - The postmaster_address configured for the LDA.
- # "<user@domain>" - Redirected messages are always sent from user@domain.
- # The angle brackets are mandatory. The null "<>" address
- # is also supported.
- #
- # This setting is ignored when the envelope sender is "<>". In that case the
- # sender of the redirected message is also always "<>".
- #sieve_redirect_envelope_from = sender
-
- ## TRACE DEBUGGING
- # Trace debugging provides detailed insight in the operations performed by
- # the Sieve script. These settings apply to both the LDA Sieve plugin and the
- # IMAPSIEVE plugin.
- #
- # WARNING: On a busy server, this functionality can quickly fill up the trace
- # directory with a lot of trace files. Enable this only temporarily and as
- # selective as possible.
-
- # The directory where trace files are written. Trace debugging is disabled if
- # this setting is not configured or if the directory does not exist. If the
- # path is relative or it starts with "~/" it is interpreted relative to the
- # current user's home directory.
- #sieve_trace_dir =
-
- # The verbosity level of the trace messages. Trace debugging is disabled if
- # this setting is not configured. Possible values are:
- #
- # "actions" - Only print executed action commands, like keep,
- # fileinto, reject and redirect.
- # "commands" - Print any executed command, excluding test commands.
- # "tests" - Print all executed commands and performed tests.
- # "matching" - Print all executed commands, performed tests and the
- # values matched in those tests.
- #sieve_trace_level =
-
- # Enables highly verbose debugging messages that are usually only useful for
- # developers.
- #sieve_trace_debug = no
-
- # Enables showing byte code addresses in the trace output, rather than only
- # the source line numbers.
- #sieve_trace_addresses = no
-}
diff --git a/roles/IMAP/files/etc/dovecot/ssl/config b/roles/IMAP/files/etc/dovecot/ssl/config
new file mode 100644
index 0000000..e5359de
--- /dev/null
+++ b/roles/IMAP/files/etc/dovecot/ssl/config
@@ -0,0 +1,2 @@
+ssl_cert = </etc/dovecot/ssl/imap.fripost.org.pem
+ssl_key = </etc/dovecot/ssl/imap.fripost.org.key