diff options
Diffstat (limited to 'roles/IMAP-proxy/files/etc/dovecot')
| -rw-r--r-- | roles/IMAP-proxy/files/etc/dovecot/conf.d/10-auth.conf | 1 | ||||
| -rw-r--r-- | roles/IMAP-proxy/files/etc/dovecot/conf.d/10-mail.conf | 20 | ||||
| -rw-r--r-- | roles/IMAP-proxy/files/etc/dovecot/conf.d/20-imapc.conf | 5 |
3 files changed, 19 insertions, 7 deletions
diff --git a/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-auth.conf b/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-auth.conf index 229ac94..1abea0c 100644 --- a/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-auth.conf +++ b/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-auth.conf @@ -1,28 +1,29 @@ ## ## Authentication processes ## # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP # matches the local IP (ie. you're connecting from the same computer), the # connection is considered secure and plaintext authentication is allowed. +# See also ssl=required setting. disable_plaintext_auth = yes # Authentication cache size (e.g. 10M). 0 means it's disabled. Note that # bsdauth, PAM and vpopmail require cache_key to be set for caching to be used. #auth_cache_size = 0 # Time to live for cached data. After TTL expires the cached record is no # longer used, *except* if the main database lookup returns internal failure. # We also try to handle password changes automatically: If user's previous # authentication was successful, but this one wasn't, the cache isn't used. # For now this works only with plaintext authentication. #auth_cache_ttl = 1 hour # TTL for negative hits (user not found, password mismatch). # 0 disables caching them completely. #auth_cache_negative_ttl = 1 hour # Space separated list of realms for SASL authentication mechanisms that need # them. You can leave it empty if you don't want to support multiple realms. # Many clients simply use the first one listed here, so keep the default realm # first. #auth_realms = diff --git a/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-mail.conf b/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-mail.conf index f106af5..e19b507 100644 --- a/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-mail.conf +++ b/roles/IMAP-proxy/files/etc/dovecot/conf.d/10-mail.conf @@ -81,66 +81,70 @@ namespace inbox { #namespace { #type = shared #separator = / # Mailboxes are visible under "shared/user@domain/" # %%n, %%d and %%u are expanded to the destination user. #prefix = shared/%%u/ # Mail location for other users' mailboxes. Note that %variables and ~/ # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the # destination user's data. #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u # Use the default namespace for saving subscriptions. #subscriptions = no # List the shared/ namespace only if there are visible shared mailboxes. #list = children #} # Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"? -#mail_shared_explicit_inbox = yes +#mail_shared_explicit_inbox = no # System user and group used to access mails. If you use multiple, userdb # can override these by returning uid or gid fields. You can use either numbers # or names. <doc/wiki/UserIds.txt> mail_uid = imapproxy mail_gid = imapproxy # Group to enable temporarily for privileged operations. Currently this is # used only with INBOX when either its initial creation or dotlocking fails. # Typically this is set to "mail" to give access to /var/mail. #mail_privileged_group = # Grant access to these supplementary groups for mail processes. Typically # these are used to set up access to shared mailboxes. Note that it may be # dangerous to set these if users can create symlinks (e.g. if "mail" group is # set here, ln -s /var/mail ~/mail/var could allow a user to delete others' # mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). #mail_access_groups = # Allow full filesystem access to clients. There's no access checks other than # what the operating system does for the active UID/GID. It works with both # maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ # or ~user/. #mail_full_filesystem_access = no +# Dictionary for key=value mailbox attributes. Currently used by URLAUTH, but +# soon intended to be used by METADATA as well. +#mail_attribute_dict = + ## ## Mail processes ## # Don't use mmap() at all. This is required if you store indexes to shared # filesystems (NFS or clustered filesystem). #mmap_disable = no # Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL # since version 3, so this should be safe to use nowadays by default. #dotlock_use_excl = yes # When to use fsync() or fdatasync() calls: # optimized (default): Whenever necessary to avoid losing important data # always: Useful with e.g. NFS when write()s are delayed # never: Never use it (best performance, but crashes can lose data) #mail_fsync = optimized # Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches # whenever needed. If you're using only a single mail server this isn't needed. @@ -190,40 +194,44 @@ mail_gid = imapproxy # need to do chrooting, Dovecot doesn't allow users to access files outside # their mail directory anyway. If your home directories are prefixed with # the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt> #mail_chroot = # UNIX socket path to master authentication server to find users. # This is used by imap (for shared users) and lda. #auth_socket_path = /var/run/dovecot/auth-userdb # Directory where to look up mail plugins. #mail_plugin_dir = /usr/lib/dovecot/modules # Space separated list of plugins to load for all services. Plugins specific to # IMAP, LDA, etc. are added to this list in their own .conf files. mail_plugins = virtual ## ## Mailbox handling optimizations ## +# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are +# also required for IMAP NOTIFY extension to be enabled. +mailbox_list_index = yes + # The minimum number of mails in a mailbox before updates are done to cache # file. This allows optimizing Dovecot's behavior to do less disk writes at # the cost of more disk reads. #mail_cache_min_mail_count = 0 # When IDLE command is running, mailbox is checked once in a while to see if # there are any new mails or other changes. This setting defines the minimum # time to wait between those checks. Dovecot can also use dnotify, inotify and # kqueue to find out immediately when changes occur. #mailbox_idle_check_interval = 30 secs # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. # Also note that if other software reads the mboxes/maildirs, they may handle # the extra CRs wrong and cause problems. #mail_save_crlf = no # Max number of mails to keep open and prefetch to memory. This only works with # some mailbox formats and/or operating systems. @@ -259,42 +267,48 @@ mail_plugins = virtual #maildir_broken_filename_sizes = no ## ## mbox-specific settings ## # Which locking methods to use for locking mbox. There are four available: # dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # dotlock_try: Same as dotlock, but if it fails because of permissions or # because there isn't enough disk space, just skip it. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # lockf : May not exist in all systems. Doesn't work with NFS. # # You can use multiple locking methods; if you do the order they're declared # in is important to avoid deadlocks if other MTAs/MUAs are using multiple # locking methods as well. Some operating systems don't allow using some of # them simultaneously. +# +# The Debian value for mbox_write_locks differs from upstream Dovecot. It is +# changed to be compliant with Debian Policy (section 11.6) for NFS safety. +# Dovecot: mbox_write_locks = dotlock fcntl +# Debian: mbox_write_locks = fcntl dotlock +# #mbox_read_locks = fcntl -#mbox_write_locks = dotlock fcntl +#mbox_write_locks = fcntl dotlock # Maximum time to wait for lock (all of them) before aborting. #mbox_lock_timeout = 5 mins # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this much time. #mbox_dotlock_change_timeout = 2 mins # When mbox changes unexpectedly we have to fully read it to find out what # changed. If the mbox is large this can take a long time. Since the change # is usually just a newly appended mail, it'd be faster to simply read the # new mails. If this setting is enabled, Dovecot does this but still safely # fallbacks to re-reading the whole mbox file whenever something in mbox isn't # how it's expected to be. The only real downside to this setting is that if # some other MUA changes message flags, Dovecot doesn't notice it immediately. # Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK # commands. #mbox_dirty_syncs = yes # Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, @@ -324,39 +338,37 @@ mail_plugins = virtual # Maximum dbox file size until it's rotated. #mdbox_rotate_size = 2M # Maximum dbox file age until it's rotated. Typically in days. Day begins # from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. #mdbox_rotate_interval = 0 # When creating new mdbox files, immediately preallocate their size to # mdbox_rotate_size. This setting currently works only in Linux with some # filesystems (ext4, xfs). #mdbox_preallocate_space = no ## ## Mail attachments ## # sdbox and mdbox support saving mail attachments to external files, which # also allows single instance storage for them. Other backends don't support # this for now. -# WARNING: This feature hasn't been tested much yet. Use at your own risk. - # Directory root where to store mail attachments. Disabled, if empty. #mail_attachment_dir = # Attachments smaller than this aren't saved externally. It's also possible to # write a plugin to disable saving specific attachments externally. #mail_attachment_min_size = 128k # Filesystem backend to use for saving attachments: # posix : No SiS done by Dovecot (but this might help FS's own deduplication) # sis posix : SiS with immediate byte-by-byte comparison during saving # sis-queue posix : SiS with delayed comparison and deduplication #mail_attachment_fs = sis posix # Hash format to use in attachment filenames. You can add any text and # variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. # Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits #mail_attachment_hash = %{sha1} diff --git a/roles/IMAP-proxy/files/etc/dovecot/conf.d/20-imapc.conf b/roles/IMAP-proxy/files/etc/dovecot/conf.d/20-imapc.conf index 47785a4..32cc391 100644 --- a/roles/IMAP-proxy/files/etc/dovecot/conf.d/20-imapc.conf +++ b/roles/IMAP-proxy/files/etc/dovecot/conf.d/20-imapc.conf @@ -1,18 +1,17 @@ # Smart IMAP proxying with imapc storage # # http://dovecot.org/pipermail/dovecot/2011-January/056975.html # http://wiki2.dovecot.org/HowTo/ImapcProxy # http://wiki2.dovecot.org/Migration/Dsync imapc_host = imap.fripost.org imapc_port = 143 imapc_user = %u # Read multiple mails in parallel, improves performance mail_prefetch_count = 20 # The list of valid features can be found there -# http://hg.dovecot.org/dovecot-2.1/file/f572fbafb445/src/lib-storage/index/imapc/imapc-settings.c +# http://hg.dovecot.org/dovecot-2.2/file/tip/src/lib-storage/index/imapc/imapc-settings.c # (in the struct 'imapc_feature_list imapc_feature_list') -imapc_features = rfc822.size - +imapc_features = rfc822.size fetch-headers |