aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rwxr-xr-xinclude/partition.sh121
1 files changed, 96 insertions, 25 deletions
diff --git a/include/partition.sh b/include/partition.sh
index 5418341..1d5b4c3 100755
--- a/include/partition.sh
+++ b/include/partition.sh
@@ -19,40 +19,111 @@
set -ue
. /lib/fripost-partman/base.sh
-device=/dev/sda
-# Umount existing mountpoints
-for mp in $(sed -nr "s#^$device\S*\s+(\S+).*#\1#p" /proc/mounts); do
- umount "$mp"
+#device=/dev/sda
+device='/dev/sda /dev/sdb' # space-separated form mutiple disks (raid)
+raidLevel=1 # raid level (leave empty for no raid)
+raidActiveDev=2 # number active devices in the array
+
+
+n=0
+for d in $device; do
+ n=$(( $n + 1 ))
+ wait_for_device $d
+
+ # Umount existing mountpoints
+ for mp in $(sed -nr "s#^$d\S*\s+(\S+).*#\1#p" /proc/mounts); do
+ umount "$mp"
+ done
+
+ # Wipe the disk
+ fripost_wipe $d
+
+ # Create a disk label
+ /sbin/parted -s $d mklabel gpt
+ log "Created disklabel GPT for device $d"
+
+ # Don't make an array of these partitions, but keep the alignment
+ # regardless (at the expense of loosing some megabytes)
+
+ # Create a EFI partition if needed; otherwise, create a partition needed
+ # to put GRUB on GPT disklabels.
+ if [ -d /proc/efi -o -d /sys/firmware/efi ]; then
+ size=256M
+ name=efi
+ if [ $n -eq 1 ]; then
+ anna-install dosfstools-udeb
+ part_efi=$( fripost_mkpart $d $name $size +boot )
+ fripost_mkfs vfat $part_efi -F 32
+ else
+ fripost_mkpart $d $name $size
+ fi
+ else
+ size=8M
+ name=bios_grub
+ if [ $n -eq 1 ]; then
+ fripost_mkpart $d $name $size +bios_grub
+ else
+ fripost_mkpart $d $name $size
+ fi
+ fi
done
-# Wipe the disk
-fripost_wipe $device
-
db_get fripost/encrypt
encrypt=$RET
-# Create a disk label
-/sbin/parted -s $device mklabel gpt
-log "Created disklabel GPT for device $device"
-
-# Create a EFI partition if needed; otherwise, create a partition needed
-# to put GRUB on GPT disklabels.
-if [ -d /proc/efi -o -d /sys/firmware/efi ]; then
- anna-install dosfstools-udeb
- part_efi=$( fripost_mkpart $device efi 256M +boot )
- fripost_mkfs vfat $part_efi -F 32
-else
- fripost_mkpart $device bios_grub 8M +bios_grub
-fi
-db_set grub-installer/bootdev $device
+
+# Install GRUB on the first device in case of an array
+db_set grub-installer/bootdev "${device%% *}"
db_fset grub-installer/bootdev seen true
+part_boot=
+part_system=
# Create boot and system partitions
-part_boot=$( fripost_mkpart $device boot 64M )
-part_system=$( fripost_mkpart $device system 100% )
-/sbin/parted -s $device align-check opt ${part_system#$device} \
- || fatal "$part_system is not aligned"
+for d in $device; do
+ pb=$( fripost_mkpart $d boot 64M )
+ ps=$( fripost_mkpart $d system 100% )
+ part_boot="${part_boot:+$part_boot }$pb"
+ part_system="${part_system:+$part_system }$ps"
+ /sbin/parted -s $d align-check opt ${ps#$d} \
+ || fatal "$ps is not aligned"
+done
+
+# Create an array on top of that
+if [ ${raidLevel:-} -a ${raidActiveDev:-} ]; then
+ [ -d /dev/md ] || mkdir /dev/md
+ /sbin/modprobe -v md_mod
+ [ -e /proc/mdstat ] || fail "/proc/mdstat missing"
+
+ log "Creating RAID device /dev/md/boot with $part_boot"
+ mdadm --create /dev/md/boot \
+ -f -R -l raid$raidLevel -n $raidActiveDev \
+ $part_boot
+ part_boot=/dev/md/boot
+ wait_for_device $part_boot
+
+ log "Creating RAID device /dev/md/system with $part_system"
+ mdadm --create /dev/md/system \
+ -f -R -l raid$raidLevel -n $raidActiveDev \
+ $part_system
+ part_system=/dev/md/system
+ wait_for_device $part_system
+
+ # They were only meant to preserve alignment accross physical
+ # devices.
+ log "Remove dummy partitions"
+ for d in ${device#* }; do
+ # efi and bios_grub are only installed on the first disk
+ fripost_rmpart $d efi || true
+ fripost_rmpart $d bios_grub || true
+ done
+
+ # Note that we're assembling the array *before* encryption rather
+ # than the otherway around. dm_crypt being now multi-threaded, the
+ # order shouldn't impact performances (and that order is
+ # significantly simpler to configure).
+fi
+
if [ $encrypt = true ]; then