From bda835d0051950c63c0f38bbf11fb6fe47b4af36 Mon Sep 17 00:00:00 2001
From: Guilhem Moulin <guilhem@fripost.org>
Date: Thu, 31 Oct 2013 01:10:49 +0100
Subject: Configure the (basic) logging policy.

---
 roles/common/files/etc/logcheck/logcheck.conf | 85 +++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)
 create mode 100644 roles/common/files/etc/logcheck/logcheck.conf

(limited to 'roles/common/files/etc/logcheck/logcheck.conf')

diff --git a/roles/common/files/etc/logcheck/logcheck.conf b/roles/common/files/etc/logcheck/logcheck.conf
new file mode 100644
index 0000000..9a7e7c6
--- /dev/null
+++ b/roles/common/files/etc/logcheck/logcheck.conf
@@ -0,0 +1,85 @@
+# The following variable settings are the initial default values,
+# which can be uncommented and modified to alter logcheck's behaviour
+
+# Controls the format of date-/time-stamps in subject lines:
+# Alternatively, set the format to suit your locale
+
+#DATE="$(date +'%Y-%m-%d %H:%M')"
+
+# Controls the presence of boilerplate at the top of each message:
+# Alternatively, set to "0" to disable the introduction.
+#
+# If the files /etc/logcheck/header.txt and /etc/logcheck/footer.txt
+# are present their contents will be read and used as the header and
+# footer of any generated mails.
+
+INTRO=0
+
+# Controls the level of filtering:
+# Can be Set to "workstation", "server" or "paranoid" for different
+# levels of filtering. Defaults to server if not set.
+
+REPORTLEVEL="server"
+
+# Controls the address mail goes to:
+# *NOTE* the script does not set a default value for this variable!
+# Should be set to an offsite "emailaddress@some.domain.tld"
+
+SENDMAILTO="admin@fripost.org"
+
+# Send the results as attachment or not.
+# 0=not as attachment; 1=as attachment; 2=as gzip attachment
+# Default is 0
+
+MAILASATTACH=0
+
+# Should the hostname in the subject of generated mails be fully qualified?
+
+FQDN=1
+
+# Controls whether "sort -u" is used on log entries (which will
+# eliminate duplicates but destroy the original ordering); the
+# default is to use "sort -k 1,3 -s":
+# Alternatively, set to "1" to enable unique sorting
+
+#SORTUNIQ=0
+
+# Controls whether /etc/logcheck/cracking.ignore.d is scanned for
+# exceptions to the rules in /etc/logcheck/cracking.d:
+# Alternatively, set to "1" to enable cracking.ignore support
+
+#SUPPORT_CRACKING_IGNORE=0
+
+# Controls the base directory for rules file location
+# This must be an absolute path
+
+#RULEDIR="/etc/logcheck"
+
+# Controls if syslog-summary is run over each section.
+# Alternatively, set to "1" to enable extra summary.
+# HINT: syslog-summary needs to be installed.
+
+#SYSLOGSUMMARY=0
+
+# Controls Subject: lines on logcheck reports:
+
+#ATTACKSUBJECT="Security Alerts"
+#SECURITYSUBJECT="Security Events"
+#EVENTSSUBJECT="System Events"
+
+# Controls [logcheck] prefix on Subject: lines
+
+#ADDTAG="no"                                                                                                                                           
+
+# Set a different location for temporary files than /tmp
+# this is useful if your /tmp is small and you are getting
+# errors such as:
+# cp: writing `/tmp/logcheck.y12449/checked': No space left on device
+# /usr/sbin/logcheck: line 161: cannot create temp file for here document: No space left on device
+# mail: /tmp/mail.RsXXXXpc2eAx: No space left on device
+# Null message body; hope that's ok
+#
+# If this is happening, likely you will want to change the following to be some other
+# location, such as /var/tmp
+
+TMP="/tmp"
-- 
cgit v1.2.3