From 7d1622f3e5db18b40cab6cecfd3c2f1fab20d782 Mon Sep 17 00:00:00 2001 From: Guilhem Moulin Date: Mon, 2 Dec 2013 20:18:28 +0100 Subject: Configure the IMAP server. (For now, only LMTP and IMAP processes, without replication.) --- roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf | 127 +++++++ .../IMAP/files/etc/dovecot/conf.d/10-logging.conf | 83 +++++ roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf | 370 +++++++++++++++++++++ roles/IMAP/files/etc/dovecot/conf.d/10-master.conf | 129 +++++++ roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf | 50 +++ .../files/etc/dovecot/conf.d/15-mailboxes.conf | 45 +++ roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf | 17 + .../files/etc/dovecot/conf.d/auth-ldap.conf.ext | 37 +++ roles/IMAP/files/etc/dovecot/dovecot-ldap.conf.ext | 140 ++++++++ roles/IMAP/handlers/main.yml | 3 + roles/IMAP/tasks/imap.yml | 49 +++ roles/IMAP/tasks/main.yml | 2 + 12 files changed, 1052 insertions(+) create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/10-logging.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/10-master.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/15-mailboxes.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/20-lmtp.conf create mode 100644 roles/IMAP/files/etc/dovecot/conf.d/auth-ldap.conf.ext create mode 100644 roles/IMAP/files/etc/dovecot/dovecot-ldap.conf.ext create mode 100644 roles/IMAP/handlers/main.yml create mode 100644 roles/IMAP/tasks/imap.yml create mode 100644 roles/IMAP/tasks/main.yml (limited to 'roles/IMAP') diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf new file mode 100644 index 0000000..8b8445b --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/conf.d/10-auth.conf @@ -0,0 +1,127 @@ +## +## Authentication processes +## + +# Disable LOGIN command and all other plaintext authentications unless +# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP +# matches the local IP (ie. you're connecting from the same computer), the +# connection is considered secure and plaintext authentication is allowed. +disable_plaintext_auth = yes + +# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that +# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used. +#auth_cache_size = 0 +# Time to live for cached data. After TTL expires the cached record is no +# longer used, *except* if the main database lookup returns internal failure. +# We also try to handle password changes automatically: If user's previous +# authentication was successful, but this one wasn't, the cache isn't used. +# For now this works only with plaintext authentication. +#auth_cache_ttl = 1 hour +# TTL for negative hits (user not found, password mismatch). +# 0 disables caching them completely. +#auth_cache_negative_ttl = 1 hour + +# Space separated list of realms for SASL authentication mechanisms that need +# them. You can leave it empty if you don't want to support multiple realms. +# Many clients simply use the first one listed here, so keep the default realm +# first. +#auth_realms = + +# Default realm/domain to use if none was specified. This is used for both +# SASL realms and appending @domain to username in plaintext logins. +auth_default_realm = fripost.org + +# List of allowed characters in username. If the user-given username contains +# a character not listed in here, the login automatically fails. This is just +# an extra check to make sure user can't exploit any potential quote escaping +# vulnerabilities with SQL/LDAP databases. If you want to allow all characters, +# set this value to empty. +#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ + +# Username character translations before it's looked up from databases. The +# value contains series of from -> to characters. For example "#@/@" means +# that '#' and '/' characters are translated to '@'. +#auth_username_translation = + +# Username formatting before it's looked up from databases. You can use +# the standard variables here, eg. %Lu would lowercase the username, %n would +# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into +# "-AT-". This translation is done after auth_username_translation changes. +auth_username_format = %Lu + +# If you want to allow master users to log in by specifying the master +# username within the normal username string (ie. not using SASL mechanism's +# support for it), you can specify the separator character here. The format +# is then . UW-IMAP uses "*" as the +# separator, so that could be a good choice. +#auth_master_user_separator = + +# Username to use for users logging in with ANONYMOUS SASL mechanism +#auth_anonymous_username = anonymous + +# Maximum number of dovecot-auth worker processes. They're used to execute +# blocking passdb and userdb queries (eg. MySQL and PAM). They're +# automatically created and destroyed as needed. +#auth_worker_max_count = 30 + +# Host name to use in GSSAPI principal names. The default is to use the +# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab +# entries. +#auth_gssapi_hostname = + +# Kerberos keytab to use for the GSSAPI mechanism. Will use the system +# default (usually /etc/krb5.keytab) if not specified. You may need to change +# the auth service to run as root to be able to read this file. +#auth_krb5_keytab = + +# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and +# ntlm_auth helper. +#auth_use_winbind = no + +# Path for Samba's ntlm_auth helper binary. +#auth_winbind_helper_path = /usr/bin/ntlm_auth + +# Time to delay before replying to failed authentications. +#auth_failure_delay = 2 secs + +# Require a valid SSL client certificate or the authentication fails. +#auth_ssl_require_client_cert = no + +# Take the username from client's SSL certificate, using +# X509_NAME_get_text_by_NID() which returns the subject's DN's +# CommonName. +#auth_ssl_username_from_cert = no + +# Space separated list of wanted authentication mechanisms: +# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey +# gss-spnego +# NOTE: See also disable_plaintext_auth setting. +auth_mechanisms = plain + +## +## Password and user databases +## + +# +# Password database is used to verify user's password (and nothing more). +# You can have multiple passdbs and userdbs. This is useful if you want to +# allow both system users (/etc/passwd) and virtual users to login without +# duplicating the system users into virtual database. +# +# +# +# User database specifies where mails are located and what user/group IDs +# own them. For single-UID configuration use "static" userdb. +# +# + +#!include auth-deny.conf.ext +#!include auth-master.conf.ext + +#!include auth-system.conf.ext +#!include auth-sql.conf.ext +!include auth-ldap.conf.ext +#!include auth-passwdfile.conf.ext +#!include auth-checkpassword.conf.ext +#!include auth-vpopmail.conf.ext +#!include auth-static.conf.ext diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-logging.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-logging.conf new file mode 100644 index 0000000..ba8e646 --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/conf.d/10-logging.conf @@ -0,0 +1,83 @@ +## +## Log destination. +## + +# Log file to use for error messages. "syslog" logs to syslog, +# /dev/stderr logs to stderr. +#log_path = syslog + +# Log file to use for informational messages. Defaults to log_path. +#info_log_path = +# Log file to use for debug messages. Defaults to info_log_path. +#debug_log_path = + +# Syslog facility to use if you're logging to syslog. Usually if you don't +# want to use "mail", you'll use local0..local7. Also other standard +# facilities are supported. +#syslog_facility = mail + +## +## Logging verbosity and debugging. +## + +# Log unsuccessful authentication attempts and the reasons why they failed. +#auth_verbose = no + +# In case of password mismatches, log the attempted password. Valid values are +# no, plain and sha1. sha1 can be useful for detecting brute force password +# attempts vs. user simply trying the same password over and over again. +#auth_verbose_passwords = no + +# Even more verbose logging for debugging purposes. Shows for example SQL +# queries. +#auth_debug = no + +# In case of password mismatches, log the passwords and used scheme so the +# problem can be debugged. Enabling this also enables auth_debug. +#auth_debug_passwords = no + +# Enable mail process debugging. This can help you figure out why Dovecot +# isn't finding your mails. +#mail_debug = no + +# Show protocol level SSL errors. +#verbose_ssl = no + +# mail_log plugin provides more event logging for mail processes. +plugin { + # Events to log. Also available: flag_change append + #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename + # Available fields: uid, box, msgid, from, subject, size, vsize, flags + # size and vsize are available only for expunge and copy events. + #mail_log_fields = uid box msgid size +} + +## +## Log formatting. +## + +# Prefix for each line written to log file. % codes are in strftime(3) +# format. +log_timestamp = "%Y-%m-%d %H:%M:%S " + +# Space-separated list of elements we want to log. The elements which have +# a non-empty variable value are joined together to form a comma-separated +# string. +#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c + +# Login log format. %$ contains login_log_format_elements string, %s contains +# the data we want to log. +#login_log_format = %$: %s + +# Log prefix for mail processes. See doc/wiki/Variables.txt for list of +# possible variables you can use. +#mail_log_prefix = "%s(%u): " + +# Format to use for logging mail deliveries. You can use variables: +# %$ - Delivery status message (e.g. "saved to INBOX") +# %m - Message-ID +# %s - Subject +# %f - From address +# %p - Physical size +# %w - Virtual size +#deliver_log_format = msgid=%m: %$ diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf new file mode 100644 index 0000000..48e2c46 --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/conf.d/10-mail.conf @@ -0,0 +1,370 @@ +## +## Mailbox locations and namespaces +## + +# Location for users' mailboxes. The default is empty, which means that Dovecot +# tries to find the mailboxes automatically. This won't work if the user +# doesn't yet have any mail, so you should explicitly tell Dovecot the full +# location. +# +# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u) +# isn't enough. You'll also need to tell Dovecot where the other mailboxes are +# kept. This is called the "root mail directory", and it must be the first +# path given in the mail_location setting. +# +# There are a few special variables you can use, eg.: +# +# %u - username +# %n - user part in user@domain, same as %u if there's no domain +# %d - domain part in user@domain, empty if there's no domain +# %h - home directory +# +# See doc/wiki/Variables.txt for full list. Some examples: +# +# mail_location = maildir:~/Maildir +# mail_location = mbox:~/mail:INBOX=/var/mail/%u +# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n +# +# +# +mail_location = mdbox:/home/mail/mailboxes/%d/%n + +# If you need to set multiple mailbox locations or want to change default +# namespace settings, you can do it by defining namespace sections. +# +# You can have private, shared and public namespaces. Private namespaces +# are for user's personal mails. Shared namespaces are for accessing other +# users' mailboxes that have been shared. Public namespaces are for shared +# mailboxes that are managed by sysadmin. If you create any shared or public +# namespaces you'll typically want to enable ACL plugin also, otherwise all +# users can access all the shared mailboxes, assuming they have permissions +# on filesystem level to do so. +namespace inbox { + # Namespace type: private, shared or public + #type = private + + # Hierarchy separator to use. You should use the same separator for all + # namespaces or some clients get confused. '/' is usually a good one. + # The default however depends on the underlying mail storage format. + separator = / + + # Prefix required to access this namespace. This needs to be different for + # all namespaces. For example "Public/". + #prefix = + + # Physical location of the mailbox. This is in same format as + # mail_location, which is also the default for it. + #location = + + # There can be only one INBOX, and this setting defines which namespace + # has it. + inbox = yes + + # If namespace is hidden, it's not advertised to clients via NAMESPACE + # extension. You'll most likely also want to set list=no. This is mostly + # useful when converting from another server with different namespaces which + # you want to deprecate but still keep working. For example you can create + # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/". + #hidden = no + + # Show the mailboxes under this namespace with LIST command. This makes the + # namespace visible for clients that don't support NAMESPACE extension. + # "children" value lists child mailboxes, but hides the namespace prefix. + #list = yes + + # Namespace handles its own subscriptions. If set to "no", the parent + # namespace handles them (empty prefix should always have this as "yes") + #subscriptions = yes +} + +namespace virtual { + prefix = virtual/ + separator = / + location = virtual:/home/mail/virtual/%d/%n + list = no + hidden = yes +} + +# Example shared namespace configuration +#namespace { + #type = shared + #separator = / + + # Mailboxes are visible under "shared/user@domain/" + # %%n, %%d and %%u are expanded to the destination user. + #prefix = shared/%%u/ + + # Mail location for other users' mailboxes. Note that %variables and ~/ + # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the + # destination user's data. + #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u + + # Use the default namespace for saving subscriptions. + #subscriptions = no + + # List the shared/ namespace only if there are visible shared mailboxes. + #list = children +#} +# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"? +#mail_shared_explicit_inbox = yes + +# System user and group used to access mails. If you use multiple, userdb +# can override these by returning uid or gid fields. You can use either numbers +# or names. +mail_uid = vmail +mail_gid = vmail + +# Group to enable temporarily for privileged operations. Currently this is +# used only with INBOX when either its initial creation or dotlocking fails. +# Typically this is set to "mail" to give access to /var/mail. +#mail_privileged_group = + +# Grant access to these supplementary groups for mail processes. Typically +# these are used to set up access to shared mailboxes. Note that it may be +# dangerous to set these if users can create symlinks (e.g. if "mail" group is +# set here, ln -s /var/mail ~/mail/var could allow a user to delete others' +# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it). +#mail_access_groups = + +# Allow full filesystem access to clients. There's no access checks other than +# what the operating system does for the active UID/GID. It works with both +# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ +# or ~user/. +#mail_full_filesystem_access = no + +## +## Mail processes +## + +# Don't use mmap() at all. This is required if you store indexes to shared +# filesystems (NFS or clustered filesystem). +#mmap_disable = no + +# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL +# since version 3, so this should be safe to use nowadays by default. +#dotlock_use_excl = yes + +# When to use fsync() or fdatasync() calls: +# optimized (default): Whenever necessary to avoid losing important data +# always: Useful with e.g. NFS when write()s are delayed +# never: Never use it (best performance, but crashes can lose data) +#mail_fsync = optimized + +# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches +# whenever needed. If you're using only a single mail server this isn't needed. +#mail_nfs_storage = no +# Mail index files also exist in NFS. Setting this to yes requires +# mmap_disable=yes and fsync_disable=no. +#mail_nfs_index = no + +# Locking method for index files. Alternatives are fcntl, flock and dotlock. +# Dotlocking uses some tricks which may create more disk I/O than other locking +# methods. NFS users: flock doesn't work, remember to change mmap_disable. +#lock_method = fcntl + +# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB. +#mail_temp_dir = /tmp + +# Valid UID range for users, defaults to 500 and above. This is mostly +# to make sure that users can't log in as daemons or other system users. +# Note that denying root logins is hardcoded to dovecot binary and can't +# be done even if first_valid_uid is set to 0. +#first_valid_uid = 500 +#last_valid_uid = 0 + +# Valid GID range for users, defaults to non-root/wheel. Users having +# non-valid GID as primary group ID aren't allowed to log in. If user +# belongs to supplementary groups with non-valid GIDs, those groups are +# not set. +#first_valid_gid = 1 +#last_valid_gid = 0 + +# Maximum allowed length for mail keyword name. It's only forced when trying +# to create new keywords. +#mail_max_keyword_length = 50 + +# ':' separated list of directories under which chrooting is allowed for mail +# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). +# This setting doesn't affect login_chroot, mail_chroot or auth chroot +# settings. If this setting is empty, "/./" in home dirs are ignored. +# WARNING: Never add directories here which local users can modify, that +# may lead to root exploit. Usually this should be done only if you don't +# allow shell access for users. +#valid_chroot_dirs = + +# Default chroot directory for mail processes. This can be overridden for +# specific users in user database by giving /./ in user's home directory +# (eg. /home/./user chroots into /home). Note that usually there is no real +# need to do chrooting, Dovecot doesn't allow users to access files outside +# their mail directory anyway. If your home directories are prefixed with +# the chroot directory, append "/." to mail_chroot. +#mail_chroot = + +# UNIX socket path to master authentication server to find users. +# This is used by imap (for shared users) and lda. +#auth_socket_path = /var/run/dovecot/auth-userdb + +# Directory where to look up mail plugins. +#mail_plugin_dir = /usr/lib/dovecot/modules + +# Space separated list of plugins to load for all services. Plugins specific to +# IMAP, LDA, etc. are added to this list in their own .conf files. +mail_plugins = virtual + +## +## Mailbox handling optimizations +## + +# The minimum number of mails in a mailbox before updates are done to cache +# file. This allows optimizing Dovecot's behavior to do less disk writes at +# the cost of more disk reads. +#mail_cache_min_mail_count = 0 + +# When IDLE command is running, mailbox is checked once in a while to see if +# there are any new mails or other changes. This setting defines the minimum +# time to wait between those checks. Dovecot can also use dnotify, inotify and +# kqueue to find out immediately when changes occur. +#mailbox_idle_check_interval = 30 secs + +# Save mails with CR+LF instead of plain LF. This makes sending those mails +# take less CPU, especially with sendfile() syscall with Linux and FreeBSD. +# But it also creates a bit more disk I/O which may just make it slower. +# Also note that if other software reads the mboxes/maildirs, they may handle +# the extra CRs wrong and cause problems. +#mail_save_crlf = no + +# Max number of mails to keep open and prefetch to memory. This only works with +# some mailbox formats and/or operating systems. +#mail_prefetch_count = 0 + +# How often to scan for stale temporary files and delete them (0 = never). +# These should exist only after Dovecot dies in the middle of saving mails. +#mail_temp_scan_interval = 1w + +## +## Maildir-specific settings +## + +# By default LIST command returns all entries in maildir beginning with a dot. +# Enabling this option makes Dovecot return only entries which are directories. +# This is done by stat()ing each entry, so it causes more disk I/O. +# (For systems setting struct dirent->d_type, this check is free and it's +# done always regardless of this setting) +#maildir_stat_dirs = no + +# When copying a message, do it with hard links whenever possible. This makes +# the performance much better, and it's unlikely to have any side effects. +#maildir_copy_with_hardlinks = yes + +# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only +# when its mtime changes unexpectedly or when we can't find the mail otherwise. +#maildir_very_dirty_syncs = no + +# If enabled, Dovecot doesn't use the S= in the Maildir filenames for +# getting the mail's physical size, except when recalculating Maildir++ quota. +# This can be useful in systems where a lot of the Maildir filenames have a +# broken size. The performance hit for enabling this is very small. +#maildir_broken_filename_sizes = no + +## +## mbox-specific settings +## + +# Which locking methods to use for locking mbox. There are four available: +# dotlock: Create .lock file. This is the oldest and most NFS-safe +# solution. If you want to use /var/mail/ like directory, the users +# will need write access to that directory. +# dotlock_try: Same as dotlock, but if it fails because of permissions or +# because there isn't enough disk space, just skip it. +# fcntl : Use this if possible. Works with NFS too if lockd is used. +# flock : May not exist in all systems. Doesn't work with NFS. +# lockf : May not exist in all systems. Doesn't work with NFS. +# +# You can use multiple locking methods; if you do the order they're declared +# in is important to avoid deadlocks if other MTAs/MUAs are using multiple +# locking methods as well. Some operating systems don't allow using some of +# them simultaneously. +#mbox_read_locks = fcntl +#mbox_write_locks = dotlock fcntl + +# Maximum time to wait for lock (all of them) before aborting. +#mbox_lock_timeout = 5 mins + +# If dotlock exists but the mailbox isn't modified in any way, override the +# lock file after this much time. +#mbox_dotlock_change_timeout = 2 mins + +# When mbox changes unexpectedly we have to fully read it to find out what +# changed. If the mbox is large this can take a long time. Since the change +# is usually just a newly appended mail, it'd be faster to simply read the +# new mails. If this setting is enabled, Dovecot does this but still safely +# fallbacks to re-reading the whole mbox file whenever something in mbox isn't +# how it's expected to be. The only real downside to this setting is that if +# some other MUA changes message flags, Dovecot doesn't notice it immediately. +# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK +# commands. +#mbox_dirty_syncs = yes + +# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, +# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. +#mbox_very_dirty_syncs = no + +# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK +# commands and when closing the mailbox). This is especially useful for POP3 +# where clients often delete all mails. The downside is that our changes +# aren't immediately visible to other MUAs. +#mbox_lazy_writes = yes + +# If mbox size is smaller than this (e.g. 100k), don't write index files. +# If an index file already exists it's still read, just not updated. +#mbox_min_index_size = 0 + +# Mail header selection algorithm to use for MD5 POP3 UIDLs when +# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired +# algorithm, but it fails if the first Received: header isn't unique in all +# mails. An alternative algorithm is "all" that selects all headers. +#mbox_md5 = apop3d + +## +## mdbox-specific settings +## + +# Maximum dbox file size until it's rotated. +#mdbox_rotate_size = 2M + +# Maximum dbox file age until it's rotated. Typically in days. Day begins +# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled. +#mdbox_rotate_interval = 0 + +# When creating new mdbox files, immediately preallocate their size to +# mdbox_rotate_size. This setting currently works only in Linux with some +# filesystems (ext4, xfs). +#mdbox_preallocate_space = no + +## +## Mail attachments +## + +# sdbox and mdbox support saving mail attachments to external files, which +# also allows single instance storage for them. Other backends don't support +# this for now. + +# WARNING: This feature hasn't been tested much yet. Use at your own risk. + +# Directory root where to store mail attachments. Disabled, if empty. +#mail_attachment_dir = + +# Attachments smaller than this aren't saved externally. It's also possible to +# write a plugin to disable saving specific attachments externally. +#mail_attachment_min_size = 128k + +# Filesystem backend to use for saving attachments: +# posix : No SiS done by Dovecot (but this might help FS's own deduplication) +# sis posix : SiS with immediate byte-by-byte comparison during saving +# sis-queue posix : SiS with delayed comparison and deduplication +#mail_attachment_fs = sis posix + +# Hash format to use in attachment filenames. You can add any text and +# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}. +# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits +#mail_attachment_hash = %{sha1} diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-master.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-master.conf new file mode 100644 index 0000000..51ed7c6 --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/conf.d/10-master.conf @@ -0,0 +1,129 @@ +#default_process_limit = 100 +#default_client_limit = 1000 + +# Default VSZ (virtual memory size) limit for service processes. This is mainly +# intended to catch and kill processes that leak memory before they eat up +# everything. +#default_vsz_limit = 256M + +# Login user is internally used by login processes. This is the most untrusted +# user in Dovecot system. It shouldn't have access to anything at all. +default_login_user = dovenull + +# Internal user is used by unprivileged processes. It should be separate from +# login user, so that login processes can't disturb other processes. +default_internal_user = dovecot + +service imap-login { + inet_listener imap { + address = 172.16.0.1 + port = 143 + } + inet_listener imaps { + port = 993 + ssl = yes + } + + # Number of connections to handle before starting a new process. Typically + # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 + # is faster. + service_count = 1 + + # Number of processes to always keep waiting for more connections. + #process_min_avail = 0 + + # If you set service_count=0, you probably need to grow this. + #vsz_limit = $default_vsz_limit +} + +service pop3-login { + inet_listener pop3 { + #port = 110 + } + inet_listener pop3s { + #port = 995 + #ssl = yes + } + + service_count = 1 +} + +service lmtp { + user = vmail + process_min_avail = 3 + + unix_listener /var/spool/postfix-mda/private/dovecot-lmtpd { + group = postfix + user = postfix + mode = 0600 + } + + # Create inet listener only if you can't use the above UNIX socket + #inet_listener lmtp { + # Avoid making LMTP visible for the entire internet + #address = + #port = + #} +} + +service imap { + # Most of the memory goes to mmap()ing files. You may need to increase this + # limit if you have huge mailboxes. + #vsz_limit = $default_vsz_limit + + # Max. number of IMAP processes (connections) + #process_limit = 1024 +} + +service pop3 { + # Max. number of POP3 processes (connections) + #process_limit = 1024 +} + +service auth { + # auth_socket_path points to this userdb socket by default. It's typically + # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have + # full permissions to this socket are able to get a list of all usernames and + # get the results of everyone's userdb lookups. + # + # The default 0666 mode allows anyone to connect to the socket, but the + # userdb lookups will succeed only if the userdb returns an "uid" field that + # matches the caller process's UID. Also if caller's uid or gid matches the + # socket's uid or gid the lookup succeeds. Anything else causes a failure. + # + # To give the caller full permissions to lookup all users, set the mode to + # something else than 0666 and Dovecot lets the kernel enforce the + # permissions (e.g. 0777 allows everyone full permissions). + unix_listener auth-userdb { + mode = 0600 + user = vmail + group = root + } + + # Postfix smtp-auth + unix_listener /var/spool/postfix-msa/private/dovecot-auth { + group = postfix + user = postfix + mode = 0600 + } + + # Auth process is run as this user. + user = $default_internal_user +} + +service auth-worker { + # Auth worker process is run as root by default, so that it can access + # /etc/shadow. If this isn't necessary, the user should be changed to + # $default_internal_user. + user = $default_internal_user +} + +service dict { + # If dict proxy is used, mail processes should have access to its socket. + # For example: mode=0660, group=vmail and global mail_access_groups=vmail + unix_listener dict { + #mode = 0600 + #user = + #group = + } +} diff --git a/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf b/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf new file mode 100644 index 0000000..a733e94 --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/conf.d/10-ssl.conf @@ -0,0 +1,50 @@ +## +## SSL settings +## + +# SSL/TLS support: yes, no, required. +ssl = required + +# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before +# dropping root privileges, so keep the key file unreadable by anyone but +# root. Included doc/mkcert.sh can be used to easily generate self-signed +# certificate, just make sure to update the domains in dovecot-openssl.cnf +ssl_cert = + +passdb { + driver = ldap + + # Path for LDAP configuration file, see example-config/dovecot-ldap.conf.ext + args = /etc/dovecot/dovecot-ldap.conf.ext +} + +# "prefetch" user database means that the passdb already provided the +# needed information and there's no need to do a separate userdb lookup. +# +#userdb { +# driver = prefetch +#} + +#userdb { +# driver = ldap +# # This should be a different file from the passdb's, in order to perform +# # asynchronous requests. +# args = /etc/dovecot/dovecot-ldap-userdb.conf.ext +# +# # Default fields can be used to specify defaults that LDAP may override +# #default_fields = home=/home/virtual/%u +#} + +# If you don't have any user-specific settings, you can avoid the userdb LDAP +# lookup by using userdb static instead of userdb ldap, for example: +# +userdb { + driver = static + # The MTA has already verified the existence of users when doing alias resolution, + # so we can skip the passdb lookup here. + args = home=/home/mail/mailboxes/%d/%n allow_all_users=yes +} diff --git a/roles/IMAP/files/etc/dovecot/dovecot-ldap.conf.ext b/roles/IMAP/files/etc/dovecot/dovecot-ldap.conf.ext new file mode 100644 index 0000000..1c504d3 --- /dev/null +++ b/roles/IMAP/files/etc/dovecot/dovecot-ldap.conf.ext @@ -0,0 +1,140 @@ +# This file is opened as root, so it should be owned by root and mode 0600. +# +# http://wiki2.dovecot.org/AuthDatabase/LDAP +# +# NOTE: If you're not using authentication binds, you'll need to give +# dovecot-auth read access to userPassword field in the LDAP server. +# With OpenLDAP this is done by modifying /etc/ldap/slapd.conf. There should +# already be something like this: + +# access to attribute=userPassword +# by dn="" read # add this +# by anonymous auth +# by self write +# by * none + +# Space separated list of LDAP hosts to use. host:port is allowed too. +hosts = localhost + +# LDAP URIs to use. You can use this instead of hosts list. Note that this +# setting isn't supported by all LDAP libraries. +uris = ldapi:// + +# Distinguished Name - the username used to login to the LDAP server. +# Leave it commented out to bind anonymously (useful with auth_bind=yes). +#dn = + +# Password for LDAP server, if dn is specified. +#dnpass = + +# Use SASL binding instead of the simple binding. Note that this changes +# ldap_version automatically to be 3 if it's lower. Also note that SASL binds +# and auth_bind=yes don't work together. +#sasl_bind = no +# SASL mechanism name to use. +#sasl_mech = +# SASL realm to use. +#sasl_realm = +# SASL authorization ID, ie. the dnpass is for this "master user", but the +# dn is still the logged in user. Normally you want to keep this empty. +#sasl_authz_id = + +# Use TLS to connect to the LDAP server. +#tls = no +# TLS options, currently supported only with OpenLDAP: +#tls_ca_cert_file = +#tls_ca_cert_dir = +#tls_cipher_suite = +# TLS cert/key is used only if LDAP server requires a client certificate. +#tls_cert_file = +#tls_key_file = +# Valid values: never, hard, demand, allow, try +#tls_require_cert = + +# Use the given ldaprc path. +#ldaprc_path = + +# LDAP library debug level as specified by LDAP_DEBUG_* in ldap_log.h. +# -1 = everything. You may need to recompile OpenLDAP with debugging enabled +# to get enough output. +#debug_level = 0 + +# Use authentication binding for verifying password's validity. This works by +# logging into LDAP server using the username and password given by client. +# The pass_filter is used to find the DN for the user. Note that the pass_attrs +# is still used, only the password field is ignored in it. Before doing any +# search, the binding is switched back to the default DN. +auth_bind = yes + +# If authentication binding is used, you can save one LDAP request per login +# if users' DN can be specified with a common template. The template can use +# the standard %variables (see user_filter). Note that you can't +# use any pass_attrs if you use this setting. +# +# If you use this setting, it's a good idea to use a different +# dovecot-ldap.conf.ext for userdb (it can even be a symlink, just as long as +# the filename is different in userdb's args). That way one connection is used +# only for LDAP binds and another connection is used for user lookups. +# Otherwise the binding is changed to the default DN before each user lookup. +# +# For example: +# auth_bind_userdn = cn=%u,ou=people,o=org +# +auth_bind_userdn = fvl=%n,fvd=%d,ou=virtual,o=mailHosting,dc=fripost,dc=org + +# LDAP protocol version to use. Likely 2 or 3. +ldap_version = 3 + +# LDAP base. %variables can be used here. +# For example: dc=mail, dc=example, dc=org +base = fvl=%n,fvd=%d,ou=virtual,o=mailHosting,dc=fripost,dc=org + +# Dereference: never, searching, finding, always +deref = never + +# Search scope: base, onelevel, subtree +scope = base + +# User attributes are given in LDAP-name=dovecot-internal-name list. The +# internal names are: +# uid - System UID +# gid - System GID +# home - Home directory +# mail - Mail location +# +# There are also other special fields which can be returned, see +# http://wiki2.dovecot.org/UserDatabase/ExtraFields +user_attrs = + +# Filter for user lookup. Some variables can be used (see +# http://wiki2.dovecot.org/Variables for full list): +# %u - username +# %n - user part in user@domain, same as %u if there's no domain +# %d - domain part in user@domain, empty if user there's no domain +user_filter = + +# Password checking attributes: +# user: Virtual user name (user@domain), if you wish to change the +# user-given username to something else +# password: Password, may optionally start with {type}, eg. {crypt} +# There are also other special fields which can be returned, see +# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields +pass_attrs = fvl=user + +# If you wish to avoid two LDAP lookups (passdb + userdb), you can use +# userdb prefetch instead of userdb ldap in dovecot.conf. In that case you'll +# also have to include user_attrs in pass_attrs field prefixed with "userdb_" +# string. For example: +#pass_attrs = uid=user,userPassword=password,\ +# homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid + +# Filter for password lookups +pass_filter = (&(objectClass=FripostVirtualUser)(fvl=%n)(isActive=TRUE)) + +# Attributes and filter to get a list of all users +#iterate_attrs = uid=user +#iterate_filter = (objectClass=posixAccount) + +# Default password scheme. "{scheme}" before password overrides this. +# List of supported schemes is in: http://wiki2.dovecot.org/Authentication +#default_pass_scheme = CRYPT diff --git a/roles/IMAP/handlers/main.yml b/roles/IMAP/handlers/main.yml new file mode 100644 index 0000000..45f817d --- /dev/null +++ b/roles/IMAP/handlers/main.yml @@ -0,0 +1,3 @@ +--- +- name: Restart Dovecot + service: name=dovecot state=restarted diff --git a/roles/IMAP/tasks/imap.yml b/roles/IMAP/tasks/imap.yml new file mode 100644 index 0000000..554bc67 --- /dev/null +++ b/roles/IMAP/tasks/imap.yml @@ -0,0 +1,49 @@ +- name: Install Dovecot + apt: pkg={{ item }} + with_items: + - dovecot-core + - dovecot-ldap + - dovecot-imapd + - dovecot-lmtpd + +- name: Create a user 'vmail' + user: name=vmail system=yes + home=/home/mail + shell=/bin/false + password=! + state=present + +- name: Create directories for user 'vmail' + file: path=/home/mail{{ item }} + owner=vmail group=vmail + state=directory + mode=0700 + with_items: + - / + - /mailboxes + - /sieve + +- name: Configure Dovecot + copy: src=etc/dovecot/{{ item }} + dest=/etc/dovecot/{{ item }} + owner=root group=root + mode=0644 + register: r + with_items: + - conf.d/10-auth.conf + - conf.d/10-logging.conf + - conf.d/10-mail.conf + - conf.d/10-master.conf + - conf.d/10-ssl.conf + - conf.d/15-mailboxes.conf + - conf.d/20-lmtp.conf + - conf.d/auth-ldap.conf.ext + - dovecot-ldap.conf.ext + notify: + - Restart Dovecot + +- name: Start Dovecot + service: name=dovecot state=started + when: not r.changed + +- meta: flush_handlers diff --git a/roles/IMAP/tasks/main.yml b/roles/IMAP/tasks/main.yml new file mode 100644 index 0000000..d71573e --- /dev/null +++ b/roles/IMAP/tasks/main.yml @@ -0,0 +1,2 @@ +--- +- include: imap.yml tags=imap,dovecot -- cgit v1.2.3